Technique Tuesday – Halloween Punch Art!!!

Posted on

Happy Tuesday!!! You know what that means….I have a fabulous Technique to share with you today! Punch Art is so much fun, uses up your scraps and really makes punches super versatile!!! I love that!

Halloween Punch Art, www.LaurasStampPad.com

How cute are all of these?? Since I’m not a huge Halloween fan, I like to find Halloween options with some of the supplies I already have. I used the Owl Builder Punch for all of these!!! Love it!!!! These little 3″ x 3″ cards are perfect to attach to a gift or treat bag. Let’s get started with each one and don’t worry, I did do a Video Tutorial for each of these!!! 🙂

Bat Punch Art, www.LaurasStampPad.com

This card is a Whisper White card base measuring 6″ x 3″ and folded in half. I used a 2-1/2″ Circle Punch in Crushed Curry for the moon!!! The branch was punched in Chocolate Chip with the Bird Builder Punch! I punched a full Owl body from the Owl Punch and then two sides of the owl. I cut the sides straight to get those wings. Using a Sponge Dauber and Whisper White ink, I added a little color around the edges for some texture. I attached the wings with a Mini Glue Dot and added him to the card with Stampin’ Dimensionals! Here is the video tutorial!

Frankenstein, www.LaurasStampPad.com

Little Frankie is my favorite!!!! I used the Owl Builder Punch for each of the pieces. I punched out a bottom half of the Owl body and the front body piece in Elegant Eggplant. I punched out a full Owl body and 1 large circle in Old Olive. I punched 2 large circles in Whisper White and 2 small circles in Basic Black. You will snip off the olive feet and place the eggplant feet to the back side of the owl. Then with your Paper Snips, you will cut the other eggplant piece into spikes for his hair and attach it to his forehead! For the eyes, you will assemble them with Mini Glue Dots – black circles onto the white ones and then cut the olive one in half and place those on top. I used a White Chalk Marker for the dots in the eyes and a Black Marker for the stitches all over!! For the greeting, I used the Happy Halloween from the Teeny Tiny Wishes Stamp Set. I stamped it in Elegant Eggplant and punched it out with the Word Window Punch. I layered this onto an Old Olive punched Washi Label Punch! Here is the Video Tutorial!

Ghost Punch Art, www.LaurasStampPad.com

I used a Whisper White card base and then layered on a piece of Basic Black measuring 2-3/4″ x 2-3/4″. I punched out an owl in Whisper White and cut off the little feet and turned it over. There is your little ghost. Then I punched out 2 small circles and 1 big circle and adhered them on with Mini Glue Dots. The greeting is from the Cheer All Year Stamp Set and I punched it out with the 1″ Circle Punch! Here is the Video Tutorial!

Spider Punch Art, ww.LaurasStampPad.com

For the little spider, I punched out a Black Owl and snipped off his feet. Then I punched 8 slivers from the piece of paper that I punched his body out of and that is how I created the legs. Check out the Video Tutorial here (it is at the exact spot for you) to see how I did that. You will also need 2 black hearts, 2 small red circles and a red body front piece. What is that front piece called? Owl belly? It looks like a vest to me! 🙂 I glued the owl belly on at the bottom of the owl body and added the hearts with 2-Way Glue Pen but you could also use the NEW Fine Tip Glue Pen! For the legs, I put Snail Adhesive all over the back of the spider and then attached all of the legs. Once I was done I added another layer of cardstock over top to really hold them in place!! I added googly eyes to the red circles and added them to the body with Mini Glue Dots. The eyes really bring him to life! If you don’t have googly eyes, you could always do black centers and a white dot like Frankie up above!!! For the greeting, I used the Teeny Tiny Wishes Stamp Set and stamped Sweet Treats in Real Red. I punched it out with the Word Window Punch. I layered this onto a Real Red punched Washi Label Punch! Here is the Video Tutorial!

Aren’t they all adorable and the best part is you can use up your scraps!!!! Love it!!! Here is the complete Video Tutorial!! Be sure to give it a thumbs up if you liked it!!!

Let me know which one is your favorite in the comments below!

Happy Punchin’

~Laura


Technique Tuesday – Halloween Treats!!!

Posted on

Happy Tuesday!!! Halloween is right around the corner and today I have some simple yet fabulous treat packaging ideas for you!!! It’s never to early to get start but wait to buy the candy to avoid temptations of eating it all before Halloween arrives!!! 😉

Halloween Spider Doily Treat Packaging, www.LaurasStampPad.com

I am loving the Spider Web Doilies and they really are so fabulous you don’t need much else to decorate!!!

SUPPLIES NEEDED: Spider Web DoiliesSketched Dots Tag & Bag Gift Bags, Sponge Daubers, Alphabet Stamp Set, Pumpkin Pie Cotton Ribbon, 1″ Circle Punch, 3/4″ Circle Punch, 7/8″ Scallop Circle Punch

First let’s start with the little mason jars. These are really quick and simple and you can put lots of different gift options in there for teachers, neighbors, friends, family, etc – Gift Card, Nail Polish, Candy, Cookies, Chex Mix, Hot Cocoa, and more! I started off by taking my 2-1/2″ Circle Punch and either Basic Black or Pumpkin Pie cardstock for the top lid! The greeting that I used came from the Cheer All Year Stamp Set from the Holiday Mini Catalog. One of them I punched out with a 1″ Circle Punch added it to the lid with a Stampin’ Dimensional. The other one I punched out with the 3/4″ Circle Punch and layered it onto a 7/8″ Scallop Circle in Basic Black!

Mason Jar Lids, www.LaurasStampPad.com

Now for the side, I added Tear & Tape half way around the jar right along the top! This is what holds the half of Spider Web Doily onto the jar! Of course since the doily has holes in it and the sticky comes through, I added the ribbon to cover it up! I used Pumpkin Pie Cotton Ribbon to tie around the jar and into a bow. On one of them I placed the bow over the doily and on the other one I placed it on the back side of the doily! All done!!! Fill with goodies and enjoy!!!

Spider Web Treat Jars, www.LaurasStampPad.com

For the Treat Bag, I started with a Sketched Dots Gift Bag and used my sponge daubers to add Pumpkin Pie and Daffodil Delight for the candy corn look!!! You can use the ink pad directly to the bag but I found this to be super messy and all of the ink doesn’t soak in so it is a bit of a waste! For the tag, I stamped the word BOO from the Layered Letters Alphabet Stamp Set and the little spider is from the Cheer All Year Stamp Set! These were stamped onto Pumpkin Pie cardstock and then die cut with the Lots of Labels Framelits! I adhered the tag to the Spider Web Doily and then to the front of the bag!!! Fill with goodies and enjoy!!!

Candy Corn Bag, www.LaurasStamppad.com

I am not a huge fan of Halloween so I’m never really drawn to Halloween Stamp Set. I do like to make a few cards and treats for the very few trick-or-treats (if any) that we do get. I usually end up giving them to stampers at classes, the cashier at the grocery store and my neighbors! Finding out of the box ways to create the Halloween look is sometimes more fun too!!!

If you would like to see today’s technique in action, check out the video below or click here!!! Be sure to give it a thumbs up if you liked it!!! Don’t forget to subscribe to my channel so you don’t miss and future videos too! 🙂

Happy Trick-Or-Treatin’

~Laura


Simple & Stunning!!!

Posted on

Emboss Cut Out, www.LaurasStampPad.com

This card is perfect for any occasion. You could make multiples of this one in no time at all and add a greeting as you need them! It also uses up scraps which I love!!! I started with a Soft Sky card base. Then I took a piece of Very Vanilla measuring 4″ x 5-1/2″ and placed the 2nd to smallest Deco Labels Framelit in the center and ran it through the Big Shot. You can use this cut out piece for another project and take the frame and place it into the Elegant Dots Embossing Folder and run it through the Big Shot again! Now this is your frame for your card!!! I used Stampin’ Dimensionals to adhere it to my card front BUT FIRST I laid it on the card front to stamp my greeting and then added the dimensionals and adhered it on. I did it in this order so that 1. I could line up my greeting in the center but not have it raised up hitting my greeting and 2. If I messed up the stamping, I could get another card base and try again without having do re-create the frame again as well. I used the greeting from the Thoughts & Prayers Stamp Set with Chocolate Chip ink. To finish off the card, I punched out Calypso Coral, Wisteria Wonder, and Daffodil Delight with the Petite Petals Punch and flower from the Itty Bitty Accents Punch! I added little Candy Dots to the center of the flowers coordinating with each color!! I really like how the Candy Dots add that little pop! Love it!!!

Happy Stampin’

~Laura


Dinosaurs Aren’t Extinct!!!!

Posted on

Dinosaur Kids Card, www.LaurasStampPad.com

This card scream little boy!!! It would be a perfect kid’s birthday card!!! I have been having fun with the No Bones About It Stamp Set because there are so many combinations!!! Here is another fun one!!

I started this one with a Whisper White Card base and added a piece of Basic Black measuring 4″ x 5-1/4″. Then I took little pieces of Whisper White measuring 1-1/4″ x 1-3/4″ and stamped a dinosaur and his coordinating bones onto it. I used Lost Lagoon, Hello Honey, and Cucumber Crush. I layered this piece onto the coordinating cardstock (1-1/2″ x 2″ ) and added the little star! I punched the star out with the Itty Bitty Accents Punch Pack! I love how the star adds a little pop and it fills in that white at the top! Then I added 2 Stampin’ Dimensionals to the back down the center! Set these aside and we are going to work on the banners. The banners are 3/4″ x 3-3/4″. Add the little banner tips to one end and stamp the feet from the dinosaur in the coordinating color! At my stamp class, my stampers made sure to put the feet in the same direction as the dinosaur….that never really occurred to me! 🙂 The things we all catch!!! Now for spacing, I added the dinosaur rectangles to the banner strips by putting them all close together to make sure the spacing was correct along the banner strips. Now for the spacing on the card, place them all down how you would like them and then pick up each one individually for adhesive! I found this to be the best way. When I tried adhering the banner strips first, I ended up with horrible spacing. I hope this helps with your card!!!

I know that the multiple stamping and cleaning to switch colors might make this card a little bit more time consuming but it is a fun card. It uses up lots of scraps of various colors of cardstock AND making multiples at one time would work really well! What colors would you use for the dinosaurs?? Let me know in the comments below!

Happy Roarin’

~Laura


Shades of Purple!!!

Posted on

Shades of Purple, www.LaurasStampPad.com

I love this card for some many reasons – the shades of Purple, that adorable Fork Bow, the little background images and the Dazzling Details!!! I love it ALL!!!!

I started with a card base of Whisper White! Then I took a piece of Whisper White measuring 3-7/8″ x 5-1/8″ and stamped different images from the Perpetual Birthday Calendar Stamp Set. I did the stars in Rich Razzleberry, the dots in Wisteria Wonder, and the starburst image in Elegant Eggplant! I just stamped them all randomly around making sure to fall off the paper so it looks completely covered! I adhered this stamped piece onto a piece of Wisteria Wonder measuring 4″ x 5-1/4″. For the ribbon, I took a piece of Rich Razzleberry Cotton Ribbon measuring 4-1/4″ and adhered the ends to the back of the Wisteria Wonder. Then I took another piece of the ribbon and created the Fork Bow. Click here for a video tutorial on how to create one! I adhered the mini bow with a Mini Glue Dot. Now you can adhere this to your card base! For the greeting, I stamped HI from the Layered Letters Alphabet Stamp Set in Elegant Eggplant onto a piece of Whisper White scrap paper. I punched it out with the Decorative Label Punch. I then punched out a second one in Elegant Eggplant and cut it in half to layer it on. You can see a tutorial on that here! Of course I adhered this to the card front with Stampin’ Dimensionals. To finish the card off, I added a little bit of Dazzling Details to the center of the starburst images!! Everything is better with a little bling! What color combination would you use for this card? Let me know in the comments below!!

Happy Blingin’

~Laura


Technique Tuesday – Simple Yet Fabulous!!!

Posted on

Happy Tuesday everyone!!!! I have two great little techniques to share with you today that are simple and yet super cool!!! You may have seen them before but if not you will be blown away!!!

Double Polka Dot Emboss, www.LaurasStampPad.com

I love so many things about this card – the colors (Navy and Coral), that bow, the greeting, and the double embossing!!!!

Supplies Needed: Polka Dot Embossing Folder, Decorative Label Punch, greeting stamp set of your choice and ribbon of your choice

I started with a piece of Whisper White measuring 4″ x 5-1/4″ and I ran it through the Big Shot in the Polka Dot Embossing Folder. I then shifted it over a bit and ran it through again to get those second dots. You can also flip it over and off set it to get a cool look. Who knew you could double emboss and get such a cool look? LOVE IT! Then I wrapped the Calypso Coral Seam Binding around it and decided I wanted a bow rather than a knot. At first I didn’t like that it came out sideways but now I love it. Every bow doesn’t come out perfect but they all look amazing!!! Then for the greeting, I stamped the birthday greeting from the Tin of Cards Stamp Set (love that font) in Night of Navy on a scrap of Whisper White. I punched it out with the Decorative Label Punch and then I punched another one in Night of Navy to layer it. Of course both punched pieces are exactly the same size so I cut the navy one in half long ways. Then I add adhesive to the stamped greeting on the top and bottom and attach one of the navy pieces to the top and one to the bottom. You can have a little bit showing or a lot; it’s all up to you! This works with lots of different punches for that perfect layering effect and pop of color!!! (For a long time, I punched 2 to get the same look but it was so bulky on the backside, then I saw this and use it all the time!!!) Of course I added the greeting to the card with Stampin’ Dimensionals!!!!

I know I am not the best with typing out instructions so I did a Video Tutorial for you!!! I show a few different ways to layer these and another fabulous tip with punches!!! Check it out below or click here!!!

Over the weekend I passed 1,000 Subscribers on my Laura’s Stamp Pad Channel! That is super exciting!!! Thank you to all of the subscribers and if you aren’t one of them, what are you waiting for???

Happy Stampin’

~Laura


Woodgrain Wonder!!!

Posted on

Woodgrain Emboss Resist, www.LaurasStampPad.com

Are you wondering how I created this awesome woodgrain look??? I used the New Color Me Irresistible Specialty Designer Series Paper!!! This piece is the Tip Top Taupe woodgrain embossed piece. I used my Chocolate Chip Sponge Dauber to color the cardstock. This is how I got the two shades of brown. I love it!!! I just cut these stripes and added it to a piece of Mossy Meadow measuring 4″ x 5-1/4″. I added this to a card base of Tip Top Taupe!! For the greeting, I used the Tin of Cards Stamp Set which is fabulous! I love a good scroll-y font!!! It is stamped in Mossy Meadow and then punched out with the Decorative Label Punch! I punched a piece of Chocolate Chip as well to layer it. I cut the chocolate chip one in half. Then add adhesive to the back of the white greeting piece and add one of the chocolate chip pieces to the top and the other to the bottom. Then you can adhere it to your card with Stampin’ Dimensionals!!! It is as simple as that!! The woodgrain makes a wonderful man card, fence, furniture and so many other great looks on a card or box!!!!

If you would like to see all of the paper in the Color Me Irresistible Designer Series Paper Pack and adding color to the paper, check out the video below! Be sure to give it a thumbs up if you liked it!!! You can also see some more cards created with this paper here!!

Happy Stampin’

~Laura


Technique Tuesday – Precious Little Purse!!!

Posted on

Happy Tuesday!!! You know what that means…..I have a fabulous technique to share with you today!!! These little purses are just so precious! They are little and perfect for adding some hand-stamped cards, candle, candy, lotion, nail polish, cookies, or just about any little gift item!!!

Mini handmade bag, www.LaurasStampPad.com

Isn’t it adorable??? I love this one the best with the Bermuda Bay accents!!! I created a few of these and have made a few of my own modifications. I got the idea from Dawn. You can check it out here as well as a video tutorial! Thank you Dawn for the inspiration!

SUPPLIES NEEDED: Cardstock, Designer Series Paper, Fast Fuse or Tear and Tape, Brads, and 1/16″ Handheld Punch

You will need the following pieces for your Purse:

For the Designer Series Paper, cut 2 pieces measuring 6 1/4″ x 3 1/2″

For the solid color accents, you will need the following:

~1 Piece measuring 2 1/2″ x 5 1/4″ (score at 1/2″ all (4) sides) for the bottom

~2 Pieces measuring 1/2″ x 8 1/2″ for the handles

~4 Pieces measuring 1/2″ x 6 1/4″ for the trim

I used the Bohemian Designer Series Paper for my purse! You can always modify to make a taller purse by changing the dimension of the Designer Series Paper (DSP) (adding inches to the 3-1/2″ number). You will start off by adhering your DSP together along the 3-1/2″ side to make. This will make a 3-1/2″ x ~12-1/4″ strip of paper. Then take the bottom piece of cardstock and cut one of the little corner pieces to create tabs so you can fold them in and make a little box bottom! Now you will take your DSP and wrap it around the little box bottom on the outside. The more I played with this, I prefer to start in the middle on the short side so that my seams are on the sides rather than in the middle/front. Now you can add Tear and Tape to all four of the 1/2″ x 6-1/4″ pieces and then use 2 for the bottom trim and 2 for the top trim!

Mini Purse made of Paper, www.LaurasStampPad.com

The last two stripes (1/2″ x 8 1/2″) are the handles! Gently run them over your Bone Folder like you are curling ribbon to help with the curvature of the handles. Also, on each of the four ends of the strips, add a little score like 1/2″ up. This will help you determine how deep to place the handles in the purse and each one will be even because you will go down to that score line!!! You can jsut adhere the handles on and you are done or you can use your 1/16″ Handheld Punch to create little holes and add brads. I used the Antique Brads in the purse above and Silver Mini Brads for the purse up top!

Bohemian Purse, www.LaurasStampPad.com

You are all done now! You can always add some embellishments like a flower using the Spiral Flower Die like this or any other fun foo foo!!! I have so many fabulous little purses in mind to create for lots of occasions! With the Holidays around the corner, these would make adorable Halloween Treat Bags or Christmas gifts or neighbor treats! Oh the possibilities!!!

What colors or Designer Series Paper would you use for your Purse??? Leave me a comment down below!

Happy Stampin’

~Laura


Center Pop Up Easel Card!!!!

Posted on

I have done a few different pop up cards. You can check those out here and here! I just think a card that pops up or out is super fun because it is different than a typical card. I also love it when the card looks great on display because I always love displaying my cards for a while to enjoy whether it be on the fridge, on the kitchen table, or near my stamp desk!!! Check out this new POP up card!!!

Pop Up Center Easel Card, www.LaurasStampPad.com

How cute?!?!?! Love it and those gold sequins are so fabulous! I really think I am going to start using them more because they really finish a card off well!!! Let’s get started on how to make this card!!!

Starting with a 8-1/2” x 5-1/2” piece of Rich Razzleberry cardstock, you will fold your card in half like you did to create a typical card base. Now place it in your Stampin’ Trimmer with the 5-1/2” along the bottom. You will now cut at 1-1/4” from the bottom up to the center score line (4-1/4”). Slide it along and cut at 4” up to the score line (4-1/4”).

You will need a Very Vanilla piece measuring 3” x 4-1/4” and place that in the center of your card (on the inside). Now you can glue down the left and right sides and add your Bohemian Designer Series Paper to each panel. The Designer Series Paper side panels measure 1-1/4” x 4” each. You will also need 2 Bohemian Designer Series pieces measuring 2-1/4” x 1-7/8” for the center piece. Before adhering them on, fold the center flap in half.

Center Easel Card, www.LaurasStampPad.com

Now you can decorate. Be sure to add a greeting or embellishment to the inside with Stampin’ Dimensionals so it can hold your easel up! I stamped the greeting from the Petite Pairs Stamp Set on a scrap piece of Very Vanilla and layered it onto a piece of Bermuda Bay which I punched the ends with the Triple Banner Punch!! Both the greeting and then banner are adhered with Stampin’ Dimensionals. I wanted this part to be popped up well so it would hold the easel up!! For the greeting on the front, I stamped it in Rich Razzleberry and punched it out with the 1-1/2″ Circle Punch. That is layered on a Bermuda Bay 1-3/4″ Scallop Circle Punch and then a 2″ Circle Punch! All of these pieces are layered with Snail Adhesive. I adhered it to the card with Stampin’ Dimensionals though. Be sure to adhere only on the bottom half so that it pops up!!! To finish it off, I added some Gold Sequins. I have been using Multi-Purpose Glue but I have found that Two-Way Glue works really well and doesn’t bubble up in the middle hole!!! Super cute! Love it!

Flat Center Easel Card, www.LaurasStamPPad.com

The other bonus is that this card still fit in a Regular Medium Envelope! Woot Woot!

Open Pop Up Card, www.LaurasStampPad.com

Here is the card open showing that you can still write on the inside vanilla piece or even up on the easel portion!

I got this idea from Dawn and you can check out her samples as well as a video tutorial here! I hope you try this card out! Leave me a comment down below what Designer Paper or design you use for your card!!!

Happy Stampin’

~Laura


Color Me Irresistible!!!!

Posted on

Color Me Irresistible Paper, www.LaurasStampPad.com

Have you seen the NEW Color Me Irresistible Specialty Designer Series Paper in the NEW Stampin’ Up! Catalog??? It can be tricky to understand exactly what it is but it is very similar to the Designer Series Paper from Sale-A-Bration! This is what it looks like in the catalog!!!
Color Me Irresistible, www.LaurasStampPad.com

Half of the sheets in the pack already have color – the 2015-2017 In-Colors and Basic Black. Then there is a coordinating piece of Whisper White with the same pattern! This paper is clear embossed with fun images which will resist ink when you add color. You can add color with a Sponge Dauber, Spritzer, Brayer, Marker, and even a stamped image!

The card above uses the Watermelon Wonder dotted paper which makes a fun, quick, and simple card! I added the greeting from the You’ve Got This Stamp Set and some Whisper White Satin Stitched Ribbon!

Tuxedo Card, www.LaurasStampPad.com

This fun little card was created with the Whisper White striped paper. I could have added color but I wanted it to look like the under shirt of a tuxedo. I like this card due to the texture and fun better than my Tuxedo Card here! For the “V” cut out, I marked the center of the paper along the top and cut down the paper there. Then I cut diagonally to that center cut from the sides!!! I added the Designer Series Paper to a Basic Black card base. I added a few Pool Party Candy Dots for a little color and flare. You could always use Black Candy Dots too! For the Bow Tie, I used the Bow Builder Punch which is super simple to punch and assemble!!! If you mail this card, I’m sure the bow will flatten but that’s okay!!! I love it!! This would be great for a Groom’s Card on the wedding day, and engagement card, or just a little something fancy for the man in your life!!!

I love this paper!!! Check back for more samples using this paper!!!

Happy Stampin’

~Laura