Mar 24 2015

Technique Tuesday – Card In A Box!!!

Posted on March 24, 2015 by Laura's Stamp Pad

Happy Tuesday!!! I have a fabulous technique to share with you today!!! It is super fabulous and has a major WOW factor! This card is for sure one to put on the mantel or desk to display!!!

How amazing is this card? It is like a flower bouquet but in 3D. If you want a flat flower bouquet, click here! Now you can see why I said this card is one to display for sure!!! LOVE IT!! You can create in with flowers, butterflies, balloons, stars and so much more!!! Now lets get started on how to create it!!!

SUPPLIES NEEDED: Cardstock, Scoring Tool (either your Stampin’ Trimmer or Simply Scored), Sticky Strip, Designer Series Paper, Stamps, and Embellishments

You will start with a piece of cardstock measuring 5-1/2” x 9”. I used Bermuda Bay in the sample above. Now using your scoring tool on the Paper Trimmer or the Simply Scored Tool, you will score along the 9” end at 2 1/8”, 4 ¼”, 6 3/8” and 8 ½”. Rotate the cardstock 90 degrees and score at 2 ¾”. Now using scissors, cut down to that 2-3/4″ along each score line to create flaps on the top half. Trim off the tiny strip left over at the end (this leaves a tab on the bottom half). Fold on the creases and use sticky strip to adhere the box together with that little flap. The best way to do this is to fold the card flat and stick the tab to the other side. By laying it flat you know it will adhere flat rather than trying to do it in the air and having it not lay flat. (I hope that didn’t super confuse you.) Now to create the tabs for inside the box which your decorations will be adhered to, you will need 2 pieces of cardstock measuring 1” x 3-1/8” and you will score at both ends at ½”. Fold the tabs to form a “z” and adhere sticky strip to the ends (opposite ends) and set aside. Now to decorate!!!!

For the back of the box, add cardstock for writing your message – this piece is 5 1/4” x 1-7/8”. Be sure to stamp before adhering it to the back of the card since it isn’t smooth. For decorating the flaps, you can use Designer Series Paper or cardstock for the top four panels. In my sample, I used Blackberry Bliss measuring 2″ x 2-5/8″ and then the Painted Blooms Designer Series Paper measuring 1-7/8″ x 2-1/2″. To add your two “Z” strips to the inside of the box, you will adhere them with one tab towards the back and then close the box and let the other tab attach to the other side of the box. For the other one, you will put it towards the front of the box and then close it to attach the other tab. See the video tutorial for more on this because I’m sure if I try to explain any more, I will only confuse you more! 🙂 Now you can embellish as desired. I used the Flower Shop Stamp Set and Pansy Punch. I also stamped a few butterflies from the Papillon Potpourri and Bitty Butterfly Punch! For the leaves, I used the Bird Builder Punch! I used little strips of Mossy Meadow to stand my flowers taller and for the butterflies, I used little strip of Window Sheet!

The other awesome thing about this card in a box is that it folds flat and fit into a regular envelope!!! Woot Woot! For the back, I used the Sale-A-Bration Stamp Set – Simply Wonderful! LOVE IT!!!!

Okay so what you have been waiting for….the Video Tutorial! I know this can be a bit confusing which is why I just had to film it. If you liked it, be sure to give it a thumbs up!!!

You can see another sample I created before by clicking here and here! I hope you enjoyed this and try it out! I would LOVE to see what you come up with so please share with me!!!

Happy Stampin’

~Laura

Mar 17 2015

Technique Tuesday – Flower Bouquet Mask!!!!

Posted on March 17, 2015 by Laura's Stamp Pad

Happy St. Patrick’s Day and Happy Tuesday !!! You know what that means…I have a fabulous technique to share with you! I’m super excited about this one because it includes flowers (Eeee) and PINK (EEeeee)!!!! How amazing is this card????

I love this so much that I almost want to frame it just to look at beautiful pink flowers everyday!!!! Now lets get started on how I created this beautiful masterpiece!!!

SUPPLIES NEEDED: Lotus Blossom Sale-A-Bration Stamp Set, Scrap Paper, Oval Framelits, Big Shot, Sponge Daubers

My card base in the card above is Melon Mambo (8-1/2″ x 5-1/2″) with a piece of Pink Pirouette layered on top (4″ x 5-1/4″). Then my Whisper White cardstock measures 3-3/4″ x 5″. You can always omit the second layer and have your Whisper White measure 4″ x 5-1/4″. Using your Lotus Blossom Stamp Set you will start to stamp your flowers all over (click here to see a how to video). I used Pink Pirouette and Melon Mambo for the sample above and stamped 6 flowers. I guess I totally ignored my “decorating in odd numbers” rule! Opps! 🙂 Once you have all of your flowers stamped, using the #3 flower image, stamp it on a piece of scrap paper and cut out the flower. You will then use this as a mask to cover up that center bottom flower when you are adding your stem. This is so you don’t stamp on top of it and create a mess on top of that flower! It also gives the illusion of a vase of flowers in the front and back. Once you are done stamping your stems it is time to add your vase. Using my Oval Framelits and my Big Shot, I cut out the #4 oval…..fourth from the biggest and fourth from the smallest!!! You will then cut off the top and the bottom of the oval. I started by cutting one end and then placing it on my card to see how much I needed to cut off the other end. It will always vary depending on how low your flowers are on your cardstock! Before adhering the vase to my card, I brushed the edges with my Sponge Dauber (LOVE) to give that darker look and make it seem more rounded and 3D!

For this sample, I used Hello Honey as my card base and Island Indigo as my vase! The flowers were stamped in Island Indigo/Lost Lagoon and Tangelo Twist/Hello Honey! The stems were done in Mossy Meadow! So many color options for your vase and just fabulous looking for any occasion. To see this in action, I created a Video Tutorial for you!!! Be sure to give it a Thumbs Up if you like it!!!!

Don’t forget that you can earn the Lotus Blossom Stamp Set with every $50 (US) you purchase from now till the end of March – only 15 more days!!! Place your order online by clicking here and you will earn points as one of Laura’s Loyal Stampers!!!

Happy Stampin’

~Laura

Mar 10 2015

Technique Tuesday – Iris Fold!!!

Posted on March 10, 2015 by Laura's Stamp Pad

Happy Tuesday!!! You know what that means….I have a fabulous technique to share with you today!!! I love this one because it creates an amazing look AND it uses little scraps (who doesn’t have millions of those laying around)!!!!

Need a third reason to create this card? It makes a great Man Card!!!! Now lets get started on how I created this!!!!

SUPPLIES NEEDED: Scraps of Paper, 2-1/2″ Circle Punch, Stampin’ Dimensionals

You will start with a piece of Whisper White cardstock measuring 4″ x 5-1/4″ and using your 2-1/2″ Circle Punch push it all the way in on right side and center it top to bottom and punch!!! Now apply Snail or Fast Fuse around the circle and start laying your strips of cardstock down. I used Pacific Point, Old Olive, and Basic Gray in the card above. The strips are about 2 inches long (or less) and maybe a 1/4″ wide. Again you can use any type of scrap because no one is going to see the back and you will just lay one down and then the next color and the next. You can do them close together or farther part just be sure that the strip crosses over the other color and that you can’t see light between the strip and the punched circle. Once you have done the first layer, you will add Stampin’ Dimensionals at each cross section and then start in with the second layer. If you need to add in more Stampin Dimensionals, that’s no problem and if you end up not using on that was already placed down, no worries there either. It will help with adhering this piece to your card front! Once you have completed the second round, you are all done!!! At this point you can add ribbon or stamping or any embellishments to the left hand side or leave it black like mine above. Add a few more Stampin’ Dimensionals to the corners and attach it to your card base (I used Old Olive above)! After that piece is in place, you will stamp your greeting. Be sure the greeting is going to fit in the hole. The greeting used above was from Remembering Your Birthday and the coordinating greeting is stamped on the inside! Love it! Simple, quick, Man Card and uses up those scraps!!!

Here is another sample using Calypso Coral, Crisp Cantaloupe and Pink Pirouette. I added in some Calypso Coral Seam Binding and the greeting is from Simply Wonderful which is a free Sale-A-Bration item! You can still earn this stamp set for FREE with a $50 (US) order placed through the end of this month! Shop here and you will also earn points as a Laura’s Loyal Stamper!!!!

Want to see this Technique in action??? Check out my video tutorial below and don’t forget to give it a thumbs up if you like it!!!

Happy Stampin’

~Laura

Mar 3 2015

Technique Tuesday – Beautiful Bokeh!!!

Posted on March 3, 2015 by Laura's Stamp Pad

Happy Tuesday!!! That means I have a fabulous technique to share with you and this one is exactly that….fabulous!!! I’m sure you have heard of or see the Bokeh look before. It is those shiny blotches of light in a photograph. So the real definition is the visual quality of the out-of-focus areas of a photographic image, especially as rendered by a particular lens. See you know what I mean, right?

Isn’t this just gorgeous??? I used Tempting Turquoise and Rich Razzleberry for the background and the greeting is from the Feel Goods Stamp Set! This style I got from a fellow demonstrator Mary Ellen! You can check her out here and see her tutorial on this technique here! I love the idea of using Painter’s Tape to hold down your Watercolor Paper and it gives that perfect trim!!!

Here is another look at this technique!!! With this one, I just added a few brush strokes of ink (Island Indigo and Pool Party) to some Watercolor Paper with my Aqua Painter. After it dried, I used the Wondrous Wreath Berry Stamp to create the dots. I added the dots with Whisper White Craft Ink! How fabulous?!?! The greeting is from the A Dozen Thoughts Stamp Set! I layered it with the Oval Punch and Scallop Oval Punch! Here is another sample using Perfect Plum and Elegant Eggplant. I added some Dazzling Details and the dots were created with Whisper White Ink and my pencil eraser!!!

Want to see this in action?? Check out my Video Tutorial below! Be sure to give it a thumbs up if you like it!!!

I hope you try out this technique and let me know how it goes. I would love to see your creations. You could do this technique in a million different colors and get a different look with each! Love it!

Happy Bokehin’

~Laura

Feb 24 2015

Technique Tuesday – No DSP Waste!!!

Posted on February 24, 2015 by Laura's Stamp Pad

Happy Tuesday!!!! You know what that means…..I have a fabulous technique to share with you today! Today, I’m going to show you how to get the most out of your Designer Series Paper (DSP). After all when it is this gorgeous, you can bear to think some might go to waste. Have no fear, I’m here to cheer you on to USE that Designer Series Paper and use it ALL!

This is the Painted Blooms Designer Series Paper from the Occasions Mini Catalog! It is so amazing and beautiful….of course I would say that being a flower fanatic and all but still it is just fabulous! Well thanks to a fellow stamper friend of mine – Patty Bennett who showed off the perfect way to create 6 cards using the sheet of paper on the far left which is a field of flowers. Even Stampin’ Up didn’t want to cut this paper up and so they framed it!!!

So lets see how to create 8 cards with this one sheet of Painted Blooms Designer Series Paper!!!! First you will start with the top of the Designer Series Paper and measure 5-1/4″ down and cut all the way across. Then to the same again….measure from the cut line you just did 5-1/4″ down and cut all the way across. You will be left with a strip of flower stems that measures 1-1/2 inches wide. Now taking those two pieces that are 12″ x 5-1/4″, you will cut along the 12″ side at 4″. This will create 6 pieces measuring 4″ x 5-1/4″. With that bottom strip that is 1-1/2″, cut that along the 12″ side at 5-1/2 creating two pieces that measure 5-1/2″ x 1/1/2″. Those are your 8 pieces and you are only giving up that little corner piece but you could always find a use for that as well. Now you can adhere your Designer Series Paper to the card base color of your choice. I used Blackberry Bliss, Rose Red, Pool Party, & Whisper White!

As you can see in the photo, the piece of paper was all used up! After you adhere the Designer Series Paper to your card base, you can decorate and embellish as you wish! I used the Million & One Stamp Set, Label Love Stamp Set and Lots of Thanks Stamp Set for my greetings. I used the Butterfly Thinlits on a few of them and thought that no greeting was necessary! I love how they turned out! Just beautiful!

To see these cards in action and maybe understand the cutting a little bit better, I created a Video Tutorial for you! Be sure to give it a thumbs up if you enjoy it!

Don’t worry if you use up all of your Painted Blooms Designer Series Paper….I know where you can get more! 🙂 Want to see other ways to get lots of cards out of one sheet of Designer Series Paper? Check out this post!

Happy Stampin’

~Laura

Feb 17 2015

Technique Tuesday – Rainbow Resist!!!!

Posted on February 17, 2015 by Laura's Stamp Pad

Happy Tuesday all! I hope you all had a wonderful weekend celebrating Valentine’s Day, Mardi Gras or just a nice weekend relaxing!!! Now it is time to get out those crafty supplies and create this amazing rainbow card because today is Technique Tuesday!!!

LOVE THIS! I think I like the stars better than the scallop but either way these cards are AMAZING!!!! Now let’s get started!

SUPPLIES NEEDED: Irresistibly Yours Designer Series Paper, Sponge Daubers, Ink Pads, Paper Towel, Greeting Stamp

You will start with a piece of Irresistibly Yours Designer Series Paper (Sale-A-Bration) measuring 4″ x 5-1/4″. Get out your ink pads and Sponge Daubers. I used Bermuda Bay, Tempting Turquoise, Mossy Meadow, Daffodil Delight, Pumpkin Pie, Melon Mambo, and Elegant Eggplant. Starting on one corner start with your Bermuda and go diagonal. Just add enough color for the look you want and you don’t need to go really wide. Take your next color and overlap it a little with the previous color so they blend together really well. I was able to use each color twice but as you can see in the two samples above, some colors are wider and my angles are different. That is okay!!!! Love it! Once you are all done adding your rainbow colors, you will take the paper towel to wipe off access ink that is sitting on top of those embossed images. You will really start to see your white embossed image POP right now! Now you can layer this onto your card front. I used Whisper White Cardstock. For my greetings, I used the Label Love Stamp Set and coordinating Artisan Label Punch (Bundle & Save!). The card on the left I used Pumpkin Pie Ink and for the card on the right, I used my markers in the same colors as the rainbow to color the stamp! LOVE IT!

If you would like to see this in action, check out my Video Tutorial! Be sure to give it a Thumbs Up if you liked it! 🙂 Also, if you would like to see more samples using the Irresistibly Yours Designer Series Paper, check those out here, here and here!

Happy Spongin’

~Laura

Feb 10 2015

Technique Tuesday – Elegant Butterfly!!!

Posted on February 10, 2015 by Laura's Stamp Pad

Happy Tuesday!!! That means I have a fabulous technique to share with you today!!! Today I am sharing the Butterfly Thinlits with you from the Occasions Mini Catalog! It is super fabulous and elegant! Also, butterflies make me think of Spring so I’m all about them right now! 🙂 How amazing are these cards?

My mom asked me for some elegant, simple cards that she could use for occasions such as Baptism, 1st Communion, Confirmation, and Weddings! This is what I came up with and she loved them!!!!

SUPPLIES NEEDED: Butterfly Thinlits, Oval Framelits, Fancy Fan Embossing Folder, Big Shot, Pearls, Very Vanilla Cardstock

I started with a Very Vanilla card base. Then I took a piece of Very Vanilla (4″ x 5-1/4″) and using my Oval Framelit I cut an oval out of the center. The size I used was the 4th one (middle one)! After cutting out the oval, I placed the piece of cardstock into the Fancy Fan Embossing Folder and ran that through the Big Shot. I adhered this piece to my card front using Stampin’ Dimensionals. You know how I love those things and I really liked how it can dimension to the card. NOTE: I placed the embossed paper onto my card front with the embossed image down, so it doesn’t pop up on my card but is smooth. I just thought this made it smooth and elegant! Then I ran a piece of Very Vanilla through the Big Shot with my Butterfly Thinlits from the Occasions Mini Catalog! LOVE these! The best way to do it to layer your Clear Cutting Pad, Dryer Sheet, Cardstock, Wax Paper, Thinlit, and Clear Cutting Pad. The Dryer Sheet and Wax Paper make it super easy to pop it out of the die and so you don’t spend hours popping out each of those butterfly details!!! I adhered the Butterfly with Mini Glue Dots and stamped the greeting in Chocolate Chip from the Crazy About You Stamp Set which is also in the Occasions Mini Catalog! Perfect! I added some Pearls to one of them! Also, I created this one as well with the Bird Builder Punch!

Of course when I showed these to my Mom she loved them and wanted lots of them to have on hand! 🙂

Here is a Video Tutorial shows you how to make this card and showing you how to die cut using your Thinlits! I hope you enjoy it and if so be sure to give it a Thumbs Up!

Happy Stampin’

~Laura

Feb 3 2015

Technique Tuesday – Sponging Backgrounds!!!

Posted on February 3, 2015 by Laura's Stamp Pad

Happy Tuesday!!! You know what that means……I have a fabulous technique to share with you today and this one uses my favorite tool – SPONGE DAUBERS!!!! Love love love them!!! Without further ado…

I took this fabulous sample right from the Stampin’ Success magazine that I receive as a Demonstrator (another fabulous perk) and I added my own flare to it! Here is the sample from the magazine which you can see I left off the Pom Pom Twine and Epoxy Heart and their background was done a little differently as well.

SUPPLIES NEEDED: Sponge Daubers, Ink Pads, Stacked with Love Washi Tape, Baker’s Twine, Hello Life Stamp Set

I started off with a card base of Whisper White and I stamped the heart outline image from the Hello Life all over the background. I did the bottom two rows in Calypso Coral, then the next row up in stamped off Calypso Coral. Then I moved to Pink Pirouette and continued with that all the way up! Then I stamped the Love image in Calypso Coral on the bottom right and with Pink Pirouette in the top left. This just adds a little fun to your background! Now you can add a strip of Washi Tape to the bottom in your choice of color and pattern. Then with a 3-1/2″ square of Whisper White you will create your sponged background. Using Pink Pirouette, Crisp Cantaloupe, and Calypso Coral, you will sponge along your piece of paper making sure to overlap the colors a little bit so you have that nice smooth transition of colors rather that strips of color. Then stamp the greeting on the sponged cardstock in Basic Black and adhere to your card with Stampin’ Dimensionals! I added a bow with the Blushing Bride Baker’s Twine to finish it off! Perfect for Valentine’s Day or any occasion!

I have created a Video Tutorial for you to showcase that sponged background! Be sure to give it a thumbs up if you liked it and don’t forget to subscribe to my Channel as well!

Happy Stampin’

~Laura

Jan 27 2015

Technique Tuesday – One Tag Fits All!!!

Posted on January 27, 2015 by Laura's Stamp Pad

Happy Tuesday!!! That means I have a fabulous technique to share with you today and I do!!!! I received the One Tag Fits All Stamp Set for free from Stampin’ Up when I attended the New Catalog Premiere! It was super fabulous and a great perk of being a demonstrator is getting to see the new catalog items before everyone else….and free stamps! If you would like to join me for these events, you can sign up to be a demonstrator now and earn a FREE kit from the Occasions Mini Catalog! Woot Woot!!!

Okay so lets get started on this fabulous technique I have to share with you today! Actually there are a few techniques….multiple uses of 1 stamp set and some cool ways to use your punches!!!! Isn’t this baby card just precious? It is very simple to make and since it is light blue and yellow, it isn’t gender specific so you can make a few of these up to have on hand. Love it!!!

SUPPLIES NEEDED: Embossing Folder, Decorative Label Punch, One Tag Fits All Stamp Set, Memento or Stazon Ink, Blendabilities or Markers, and Ribbon

I started with a piece of Soft Sky cardstock measuring 4-1/4″ x 11″. I folded the card in half and then stuck the front of the card in my Polka Dot Embossing Folder and ran it through the Big Shot! Then I stamped the New Baby image, from the One Tag Fits All Stamp Set which is in the new Occasions Mini Catalog, with the Memento Ink onto a scrap piece of Whisper White Cardstock. If you are coloring the duck in with Markers, you will want to use Stazon Ink. If you are coloring the duck in with Blendabilities, you will want to use Memento Ink. This is so the ink won’t bleed when you are coloring. After stamping it down, I colored it in with my Pumpkin Pie Blendabilities and Daffodil Delight Blendabilities! Then I lined up this image in my Decorative Label Punch and punched it out. I then took my Decorative Label Punch and put my card front in the punch towards the right side and all the way into the punch so that I knew it was straight/even. I punched! Then I added Stampin’ Dimensionals to my stamped, colored, and punched piece and placed it in the punched hole on my card front. The best way to line it up is to have the card folded shut and just lay it in that punched hole. This is adhering the piece to the inside of the card which makes a fabulous front and inside to the card! Precious! Then I added some Daffodil Delight Cotton Ribbon around the side of the card and through that punched hole! Quick and simple and fabulous!!!!

Here is another photo showing the image on the inside! If you want to see this in action, check out my Video Tutorial on this card and others that you can create with this amazing One Tag Fits All Stamp Set! Don’t forget to subscribe here so you don’t miss out on those cards that will be posted later this week and next week. At the top right of my page – www.LaurasStampPad.com you can enter your email address and then you will get an email every time I post something new!

Get your One Tag Fit All Stamp Set today!!!

Happy Stampin’

~Laura

Jan 20 2015

Technique Tuesday – Crazy About You!!!

Posted on January 20, 2015 by Laura's Stamp Pad

Happy Tuesday!!!! That means I have a fabulous technique to share with you today!!! I’m sharing the Crazy About You Stamp and coordinating Hello You Thinlit Die! I love this stamp set because it has some fabulous greetings and flowers!!!! Double Win!!!

How fabulous is that? I am loving that color combo too – Strawberry Slush, Calypso Coral, and Crisp Cantaloupe!!! Let’s get started!

SUPPLIED NEEDED: Cardstock, Crazy About You Stamp Set, Hello You Thinlit, Big Shot, 1-3/4″ Scallop Circle Punch, Wax Paper, and Embellishments

I started off with a card base of Pistachio Pudding (4-1/4″ x 11) and I stamped the leaf image from the Crazy About You Stamp Set from the Occasions Mini Catalog with Pistachio Pudding ink on the bottom! Then I stamped the flower in Strawberry Slush, Calypso Coral, and Crisp Cantaloupe Ink onto scrap paper and punched them out with my 1-3/4″ Scallop Circle Punch! I adhered one of the flowers right to the paper and popped the other two up with Stampin’ Dimensionals! Now comes the fun part – picking out a fabulous greeting! The Crazy About You Stamp Set has greetings that coordinate with the Hello You Thinlits as you can see above! There are so many mix and match options!

When you are using your Thinlits to cut out the greetings I have the following tips it goes smooth! 🙂

~Use Wax Paper on top of the cardstock when cutting out the words! This will help it pop right out of the die much easier. Your layers will go…Magnetic Plate or Multi-Purpose Platform / Clear Cutting Pad / Cardstock / Wax Paper / Thinlit / Clear Cutting Pad

~If your words don’t pop out right away, you can use the back of a straight pin or even Paper Snip tips to push it from the backside through those little holes in the Thinlit!

~If it seems that your Thinlit is not cutting through the cardstock, you may need to add a shim (I use a little piece of the cardstock that comes in the back of Designer Series Paper packs)! This adds a little bit of thickness so the die is pressed nice and tight!

Once you have your words cut out you can attach them to your card and stamp the coordinating greeting of your choice! I stamped “So Much” in Pistachio Pudding! Super fabulous! I hope you enjoyed this and if you want to see it in action, check out my Video Tutorial below! Be sure to give it a Thumbs Up if you liked it and don’t forget to subscribe to my Channel so you don’t miss any future videos!

If you want to see the other sample shown in the video, click here!!!

Happy Stampin’

~Laura

Laura's Stamp Pad

Laura Borchert ¤ Independent Stampin' Up!® Demonstrator ¤ Laura@LaurasStampPad.com

Tag Archives: Technique Tuesday

Technique Tuesday – Card In A Box!!!

Technique Tuesday – Flower Bouquet Mask!!!!

Technique Tuesday – Iris Fold!!!

Technique Tuesday – Beautiful Bokeh!!!

Technique Tuesday – No DSP Waste!!!

Technique Tuesday – Rainbow Resist!!!!

Technique Tuesday – Elegant Butterfly!!!

Technique Tuesday – Sponging Backgrounds!!!

Technique Tuesday – One Tag Fits All!!!

Technique Tuesday – Crazy About You!!!