Sep 6 2016

Technique Tuesday – Masking a Scenery!!!

Posted on September 6, 2016 by Laura's Stamp Pad

Happy Tuesday everyone!!! We made it through Monday and now it’s time to check out this amazing technique! I am loving the new Sponge Brayers and all the fun you can have with them! Check out this beauty using the masking technique!!!

That simple, yet amazing color of green grass and blue sky just makes this card so beautiful! I love it. Then you have those white lines of where the color stops and it just looks perfect!

SUPPLIES NEEDED: Sponge Brayer, Marina Mist Ink, Pear Pizzazz Ink, Lovely As A Tree Stamp Set

You will start with a piece of Whisper White (4″ x 5-1/4″) and mask off a section of the cardstock for your coloring and trees. Make sure it is wide enough to stamp the trees. You can use scrap paper as a mask but I found Post-It Note Tape so it is sticky paper tape (that comes off without ripping your cardstock) that holds perfectly. Thank you to Kim Schultze for all the tips and tricks at a recent demonstrator gathering! 🙂

I added the top piece level with the top of the cardstock and the top of the tape. Then for the second piece I went down about 3/4 of the way of the cardstock. Again, you can go as wide as you wish, just make sure it is big enough for your stamped image. Then you will take a Sponge Brayer and Marina Mist Ink and add it to the top half of the masked off space. Just lightly roll over the ink and then lightly over the cardstock until you get the desired color. Pressing hard won’t make the color darker, just keep going back to the ink for a darker color. Once you have the desired blue, you will move to the bottom section of the masked space and add Pear Pizzazz Ink. Be sure to overlap the colors a bit so it fades nicely together and doesn’t look like stripes of blue and green. Once you have your desired shade of green, you are all set. You can remove the scrap paper or Post-It Note Tape and complete your card. I stamped the trees from Lovely As A Tree in Chocolate Chip. The greeting is from the Thoughts & Prayers Stamp Set. I thought it needed a little bit more so I cut a small piece of Burlap Ribbon and added it to the top left corner. I adhered it on the front with a little Tear & Tape and secured it on the back with Stampin’ Dimensionals. I added more dimensionals on the back and adhered it to the Marina Mist card base!

I love it! This makes a great man card but also a simple and elegant card for thinking of you, sympathy, and just about any occasion. It is such a beautiful scenery! You could always use this same technique to create a colorful background and stamp flowers over the top or any other favorite image. Stay tuned as I have a lot more masking samples to share with you! 🙂

If you would like to see this technique in action, check out the Video Tutorial below or click here. Don’t forget to give it a thumbs up if you liked it and be sure to subscribe if you are new!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Sep 1 2016

Stitched With Cheer Project Kit!!!

Posted on September 1, 2016 by Laura's Stamp Pad

The moment I saw the Stitched With Cheer Kit in the Holiday Mini Catalog I just knew I had to have it. I always love getting the kits to see what they are all about but this one had me really excited. I’m not the best as sewing as I tend to do it while watching TV and sometimes I miss a hole but it turned out amazing!!! I got this kit in my pre-order and did all of these cards while watching the Olympics last month!!! 🙂 The kit makes 18 cards – 6 each of the 3 designs.

This one is my favorite!!! I love the snowflake and it was pretty easy!!! You will stitch the star with the gold baker’s twine and stamp the greeting from the coordinating Stitched with Cheer Stamp Set in Basic Black Ink. The kit even comes with backs so you can attach them to the inside of the card and no one sees your stitching. I love that and even stamped a little inside greeting on that panel. I added the loops of Gold Metallic Thread (provided in the kit) to the back of the greeting and placed it on the card!!! Just wrap the thread around your fingers and then slide them off, twist in the middle and place on the back of your greeting and secure with Stampin’ Dimensionals like the photo below!

Yes I probably use way to many dimensionals but I love them and I always know where I can find more! 😉

This is my second favorite but the trees don’t look as cute flat so I just hope the people I send this card to pop those trees out for the full beauty!!! 🙂 TIP: Be sure to fold your trees in half before stitching them to the card. I didn’t fold the first set and pulling them forward didn’t work as well. I love the little pearls that add some texture and shine to this stunning card. Again, I used the greeting from the Stitched with Cheer Stamp Set.

Here is what the inside of the card looks like after the stitching is done. I used a little bit of Tear Tape to secure the ends of the thread. The kit comes with inserts to add to the inside of the card so that you can cover up your stitching! I love that they thought of everything for you! I also stamped a little greeting on the insert for a little decoration on the inside!!

Okay so you are all probably thinking I don’t like this one….that’s not completely true. I love the look. I love the stitched star and the holly…..but that greeting….oh my! Luckily they give you 8 banners to stamp in hopes to get 6 right. That was tough. I mean I consider myself a good stamper….until now! Lining it up was step 1 but then I kept getting ink on the banner ends that collected inside the banner so then I stamped lighter and it wasn’t stamped well. Oh I thought I was going to go insane. So I just have to say…..good luck! There is also a complete extra set of banners that you could always use instead too. See the “extras” photo at the bottom.

Here are some variations of the card that I did to cover some boo boos. For the middle card, I accidentally adhered the burlap to the bottom of the card…it was upside down when I did it. (I was watching the Olympics, remember.) 🙂 So for that one, I added one of my messed up stamped greetings and added the holly over the mistake. See you would have never known if I didn’t tell you!

And then we have all the leftovers. There are tons of holly leaves left and an entire sheet of labels. I thought about stamping the labels as gift tags and added some holly. Super cute, right??? These are also the banners that you could substitute for the card above if you have issues matching up the greeting as well! 🙂 I love it!!! Now I have 16 cards done already and they are super cute and fun! I love the coordinating envelopes with liners too! They just make me so happy!

To see all of the goodies in the kit, check out my Reveal of the Stitched With Cheer Kit below or click here! Don’t forget to give this video a thumbs up if you liked it and be sure to subscribe if you are new!

Do you like making your own Holiday cards or using a kit??? Let me know in the comments below!

Happy Stampin’

~Laura

Aug 30 2016

Tempting Techniques – Christmas Wreath!!!

Posted on August 30, 2016 by Laura's Stamp Pad

Happy Tuesday!!! I’m coming off a Birthday high over here!!!! It was a wonderful day but we are back at it today with a fabulous technique!!! I’m going to show you how to create something out of the box with a fabulous stamp set – Jar of Love!!! This set is super versatile and those jars will be appearing in lots of upcoming sets as well. 😉 Stay Tuned!

Okay, I am aware that Christmas is far off (not as far as you think) and we don’t need to start the season any sooner than retail outlets do but……. It is always good to get these cards done early so you can enjoy the holiday season! This card can be created with a set that might not look like a Christmas set too!!! I used the Jar of Love Stamp Set and coordinated Everyday Jar Framelits (Bundle & Save 10%)

I started with a Whisper White card base which I like to use for holiday cards because white is so easy to write in! Then I took a piece of Real Red cardstock measuring 4-1/8″ x 5-3/8″ and layered it onto the front. With a piece of Whisper White measuring 4″ x 5-1/4″, I stamped the greeting from the Wondrous Wreath Stamp Set in Real Red at the top! For the wreath, I took the branch stamp from the Jar of Love Stamp Set and added it to a clear block with the long stem wrapped around the block to the top side. I don’t want that long stem on my project so I just wrapped it around so it wouldn’t pick up ink. I love that about photopolymer stamps and how you can bend, omit, and play with different angles!

Then I inked it up in Cucumber Crush ink and stamped it in a circle towards the bottom of the card. Start on the bottom with the wreath going to the left or right and then work your way around. TIP: Punch out a circle in the size you want the center to be as a guide to go around so your circle doesn’t become and oval or get out of hand.

I added some of the Cucumber Crush Mini Striped Ribbon between the greeting and the wreath and added it to the card front! I stamped the bow from the Jar of Love Stamp Set in Real Red and die cut it with the Everyday Jar Framelits. I added it to the wreath with Stampin’ Dimensionals! For little items like this, you can cut the dimensional in half or use the outside border!

If you would like to see this in action, check out the Video Tutorial below or click here! Be sure to give it a thumbs up if you liked it and don’t forget to subscribe if you are new!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Aug 25 2016

Stamping with my Husband….blindfolded!!!

Posted on August 25, 2016 by Laura's Stamp Pad

So this card may look super easy and it is…..unless you are blindfolded. I was going to do the No Hands Challenge with my husband but he is so much taller than me that he could see over my shoulder. He suggested just blindfolded him and I would coach him through it. I thought it would be super fun to do and it was rather entertaining. He can’t see but I walk him through creating this card! Check out the video below to see how he did!!! 🙂

I started with a Whisper White card base and stamped the greeting from the Love & Affection Stamp Set in Cucumber Crush. Be sure you stamp this in the far right corner so there is plenty of room for your design along the left. Then I took a piece of Whisper White (1-1/2″ x 5-1/2″) and stamped the flowers and leaves from the Love & Affection Stamp Set. I stamped the big flower in Watermelon Wonder and the small flower in Crushed Curry; both with Night of Navy centers. The leaves were stamped in Cucumber Crush. I layered this piece onto Crushed Curry and added it to the left side of the card front! Simple and fabulous! It is like creating your own designer paper!

While that seemed simple, let’s see how it is when you are coaching someone else’s hands to create it! My husband did pretty well until he got inky fingers and why he stamped everything in the middle, I do not know! 🙂 Check out the video below or click here! Don’t forget to give it a thumbs up if you liked it and be sure to subscribe if you are new!

Happy Stampin’

~Laura

Aug 23 2016

Technique Tuesday – Embossing Foil Paper!!!

Posted on August 23, 2016 by Laura's Stamp Pad

Happy Tuesday!!! You all know what that means! I have a fabulous technique to share with you today and it is super simple but has a major WOW factor! Check out this beauty – pink perfection, yummy cupcake, silver bling, and silver texture foil!!!

I just love this card. It makes me so happy and I just want to frame it so I can smile every time I pass by it!!! There is so much pink and bling and texture!!!

SUPPLIES NEEDED: Embossing Folder of Choice, Big Shot, Foil Paper of Choice

I took a piece of Silver Foil Paper and placed it into the Elegant Dots Embossing Folder. Be sure that the foil is faced up correctly on how you want your image. If you want it embossed the raised side should be behind the foil, if you want it debossed the raised side should be on the foil side! Run it through the Big Shot and check out the beautiful paper you just created! It is that simple. Isn’t that fabulous???

This card starts with a Melon Mambo card base and I layered on a piece of Whisper White cardstock (4″ x 5-1/4″). Then I took a piece of the Pop of Pink Specialty Designer Series Paper (3-3/4″ x 5″) and adhered it to the card front. I just wanted to layer on all the pink I could! 🙂 I placed the embossed Silver Foil to the bottom 1/3 of the card. Taking a piece of Whisper White, I stamped the greeting from the Sweet Cupcakes Stamp Set in Melon Mambo and added the banner tips with the Triple Banner Punch! I added this to the right side of the card flush with the edge on top of the foil. I used Stampin’ Dimensionals to adhere the greeting because the foam goes into the bumps of the embossed image and holds very well. With some scrap white paper, I stamped the cupcake liner in Tip Top Taupe. First image was stamped off twice, second image was stamped off once, and the third image is full strength Tip Top Taupe. The icing was stamped in Melon Mambo the same way. Check out this video for more on how to stamp the cupcake! I die cut the cupcake liner and icing with the coordinating Cupcake Cutouts Framelits (Bundle & Save 10%). I added the cupcake to the card front with Stampin’ Dimensionals again to hold tight on the bumps of the embossed foil. I wanted a little more bling on this card so I added some Silver Sparkle Dazzling Details to the cupcake icing and little dots on the greeting banner!

Tuesday is also video day on my YouTube Channel – Laura’s Stamp Pad. Today I posted a sneak peak of one of the kits in the Holiday Mini Catalog that begins on September 1st! Click here to check that out!

To see more samples using the Sweet Cupcake Bundle, click here!

Happy Stampin’

~Laura

Aug 18 2016

Fun with Enamel Shapes!!!

Posted on August 18, 2016 by Laura's Stamp Pad

I am loving these cards…..and not just because of the yummy cupcakes! I love the bright colors, simple style and those Enamel Shapes. I made lots of these cards and of course every pack of Enamel Shapes only comes with so many in each color but you can mix and match them for every card! I love that.

I started with a Very Vanilla card base and added a strip of Playful Palette Designer Series Paper (2″ x 5-1/2″). You can get 3 of these strips from 1 sheet of the Designer Paper since this pattern comes in a 6″ x 6″ stack! I stamped the cupcake liners and icing from the Sweet Cupcake Stamp Set. I then die cut them out with the coordinating Cupcake Cutouts Framelits (Bundle & Save 10%). You can check out more about the 3-step stamping of the cupcakes here! I used Tip Top Taupe for all 3 on the liner. For the icing, I used Sweet Sugarplum stamped off, full strength Sweet Sugarplum, and then Rich Razzleberry. I added the cupcake to the card with Stampin’ Dimensionals. I stamped the greeting from the Sweet Cupcake Stamp Set in Rich Razzleberry. To finish off the cards, I added Brights Enamel Shapes and In-Color Enamel Shapes. The packs come with dots, stars, and hearts. There are only so many of each so if you are using 3 per card and making multiples, you need to mix and match. I think they all look amazing on the same style of card! Love them!

If you would like to see the Enamel Shapes up close and a fabulous way to store them, check out my Video Tutorial below or click here! Don’t forget to give it a thumbs up if you liked it and be sure to subscribe if you are new!

Do you have a fabulous tip on organizing your craft room? I would love to hear about it. Let me know in the comments below!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Aug 16 2016

Technique Tuesday – Jar of Love!!!

Posted on August 16, 2016 by Laura's Stamp Pad

Happy Tuesday, everyone!!! Today I have a simple technique for you! I will be showing you how to create a beautiful bouquet of flowers with the Jar of Love Stamp Set and coordinating Everyday Jar Framelits (Bundle & Save 10%). Check this out!!!

You all know how much I love flowers and this bouquet is just stunning. I love that the flowers are 2-step stamping to really give detail and color variation to the flowers. There are 2 flowers that stamp together and die-cut together so that makes it super quick to make lots of flowers in little time! Love it!!!

The Jar of Love Stamp Set has so many amazing images to use for every occasion of card – flowers, fish, twigs, lightening bugs, water, and more. There are 3 sizes of jars, a lid, and a handle and tons of greetings. I stamped the jar and greeting in Basic Black onto Whisper White. Then I took the 1/16″ Handheld Punch and punched little holes on either side of the jar rim. I looped some Linen Thread through the holes and tied it into a bow. There is a bow image you can stamp but I wanted a little more texture on my jar. Then I took some scrap white paper and started stamping tons of flowers. The little flowers come in a double stamp so you are actually stamped 2 flowers at the same time. I stamped the solid image in Perfect Plum and the details in the middle in Elegant Eggplant. Then I die cut them out with the coordinating Everyday Jar Framelits which are also a double framelit. I stamped the 5 petal flower in Peekaboo Peach and die cut them out with the coordinating framelit. Now it is time to assemble. I stamped the larger flower in Flirty Flamingo, stamped off once for the base and full strength for the detailed image and black for 4 little lines (pollen). I added some greenery as well in Cucumber Crush. You will want to fill in with flowers and greenery around the entire area so that it looks like there are flowers underneath the ones popped up. I added Stampin’ Dimensionals to the die cut flowers to pop them up and give some dimension to the bouquet. I rounded the right 2 edges of the Whisper White with the Corner Rounder Punch. I used a Pool Party card base and added one of the Delicate White Doilies to the front. Then I added the flower bouquet to the left hand side of the card. To finish it of, I added a few Enamel Shapes for a little pop of color and texture to balance out the card!

If you would like to see more on the Jar of Love Bundle and how to stamp the flowers, check out the Video Tutorial below or click here. Be sure to give it a thumbs up if you liked and don’t forget to subscribe if you are new!

I hope you enjoy flowers as much as I do. I have a few more beautiful samples to share so stay tuned! 🙂

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Aug 11 2016

Cupcake Creations!!!

Posted on August 11, 2016 by Laura's Stamp Pad

I love cupcakes sooooo much! They are my favorite dessert by far! I love plain ones, ones without icing, and ones that had icing and cookie crumbles and goody on top! I love them all!! When I saw the Sweet Cupcake Stamp Set, I was in love. The details of the liner and the icing make it so real. The coordinating Cupcake Cutouts Framleits (Bundle & Save 10%) cut out the images so perfectly! I love it all!!!!

I started with a Whisper White card base and added a piece of Pop of Pink Designer Series Paper to the front! The simple black and white polka dots gives texture but doesn’t take away the focus of the colorful cupcakes!!! Then I tied some of the Melon Mambo Stitched Ribbon around the top and into a bow! Now it is time for cupcake creations! I suggest pulling out all of those white scraps you have and just start playing with different color combinations. The Sweet Cupcake Stamp Set is actually a 3-step stamping set where the icing and liner are 3 different images all layered on top of each other!

You can use 3 different ink colors or just 1 or 2. I found that 1 or 2 ink pads were my favorite. If you use 1 ink pad, you will ink up image 1, stamp off twice and then onto your white cardstock. Take image 2, stamp off once, and then onto the first image. Take image 3 (the smallest one), ink it up and stamp if onto the others full strength. This goes for both the liner and the icing. Here are a few I played with.

I preferred a more tan/brown liner but you could always go with a color as well!

Once you have your cupcakes complete, you can die cut them with the Cupcake Cutout Framelits. I added the cupcakes to the card front with Stampin’ Dimensionals….of course! 🙂 I used the framelits for the banner as well. The banner framelit cuts out the banner and creates little score lines for it to pop out like the sample above. I stamped the greeting from the Sweet Cupcake Stamp Set in Bermuda Bay Ink and added it to the card with Stampin’ Dimensionals. To finish it off, I added a little Enamel Shape!

If you would like to see this all in action, check out the Video Tutorial below or click here. Don’t forget to give it a thumbs up if you liked it and be sure to subscribe if you are new! I post every Tuesday and Thursday!

Happy Stampin’

~Laura

Aug 10 2016

Pop Up Corner Card!!!

Posted on August 10, 2016 by Laura's Stamp Pad

This is a super beautiful card because of that amazing Affectionately Yours Designer Series Paper! I mean just look at that little shiny flower reflection in the right corner. Ahhh, it’s so beautiful! I am loving the new copper foil!!! You might be thinking this card looks fairly plain and simple but just wait till you open it up!!!!

That is the inside!!! This card pops up and stands which shows off all of that gorgeous paper. I always think that cards like these are perfect for someone’s desk, bedside table or hospital room during their stay or recovery, or even to send to someone with a photo on the right side to display in their home. This is for sure a card you will want to display for a long time and not just read it and set it aside! So let’s get started!

You will start with an 8-1/2″ x 8-1/2″ piece of Watermelon Wonder cardstock and score it in half on both sides (4-1/4″). This will then create 4 equal squares on your card. Then turn your square diagonal in your Stampin’ Trimmer and score one of the squares from the outside corner to the center corner. You can always use a ruler and Bone Folder if you wish! Now you will fold on all score lines. With the diagonal fold in the upper left corner, you will cut the right side square apart on the score line. For the folding magic, you will fold the diagonal line in half making a triangle in that square, then fold the back square up, the front square up and that last square will fold around. Here is a little diagram to help!

Now it is time to decorate!!! I used the Affectionately Yours Designer Series Paper for the front and one of the inside panels. Those pieces measure 4″ x 4″. For the greeting on the front, I used a scrap strip of Whisper White and stamped the greeting from Love & Affection Stamp Set in Cucumber Crush. I added the banner tips by cutting up the center of the end of the paper and then diagonal from the corner to that center cut line! I went with a basic front since the Designer Series Paper (DSP) does all of the work and the inside is so fabulous as well. I attached the DSP to the right side. For the left side, I cut a piece of Whisper White (4″ x 4″) and added some of the Affectionately Yours Designer Washi Tape to the top and bottom and stamped in the middle with the Love & Affection Stamp Set!

Once you get the folds down, it is a really simple but WOW card!! You can create this card with lots of different looks for any occasion! I love it!!! Here is one more photo!

I want to give a big shout out to my amazing upline, Meg Loven for this amazing idea! She is a wonderful stamper and shared this idea. I couldn’t wait to create it with my favorite Designer Series Paper! She also did a Video Tutorial on this as well so you can check that out here! Thanks, Meg!!!

If you love the Affectionately Yours Suite as much as me, check out these other samples here, and here!

Happy Stampin’

~Laura

Aug 9 2016

Technique Tuesday – Waterfall Card!!!

Posted on August 9, 2016 by Laura's Stamp Pad

Happy Tuesday!!! That means I have a fabulous technique to share with you today and this one is super fun!!! It is a great way to show off Designer Series Paper or have a greeting slowly reveal itself. Check this out!!!

Look at all of these color and amazing look!!! The magic happens when you pull the ribbon tab at the bottom – each square moves up and flips over to reveal the one below it. Then a message pops out as well – “Just as sweet as can be”! This style of card is called a Waterfall Card!!! Let’s get started!

You will need the following pieces:

Three 2″ x 2″ Squares – I used Watermelon Wonder Peekaboo Peach, and Daffodil Delight.
Three 1-3/4″ x 1-3/4″ Designer Series Paper (or Whisper White to stamp on) – I used the Fruit Stand Paper.
1-3/4″ x 8-1/2″ piece of Crumb Cake, scored at 1-3/4″, 2-3/4″ and 3-3/4″ for the waterfall base
1″ x 4-1/4″ piece of Dapper Denim to go across the card and hold your waterfall in place
8-1/2″ x 5-1/2″ Dapper Denim card base
4″ x 5-1/4″ piece of Designer Series Paper for background. I used the Fruit Stand Paper.

Okay now we are ready to get started assembling. If you prefer to stamp and image or greeting on each of the squares, you will want to do that first. If you are using Designer Series Paper like I did above, let’s get started! Adhere each of the 1-3/4″ Squares to the 2″ Solid Cardstock Squares. Now you will take the strip of Crumb Cake and fold on each of the score lines. You will see there are 3 rectangles created with the score lines. You will add adhesive to each of the rectangles. Then starting at the end (last rectangle), place one of the squares centered side to side and covering the entire rectangle. Continue to do this with the other 2 squares as well. Your waterfall will have each of the squares on the front with a long piece going down the back. Underneath the squares will be where you will want to stamp a greeting if you wish! I stamped a greeting from the Sweet Stack Stamp Set. You will also want to add your ribbon for the pull tab. You can punch a hole with the 1/8″ Handheld Punch or you can always staple a piece of ribbon folded in half! I used the Dapper Denim Ruched Ribbon. Now your waterfall is complete. Fold your card base in half and adhere the Fruit Stand Designer Series Paper to the front (4″ x 5-1/4″). Now to assemble your waterfall to your card. You will adhere the end (end with the Fruit Stand Square on it to the center of the Dapper Denim (1″ x 4-1/4″) and allow the other end of the Crumb Cake (end with the ribbon) to go behind the Dapper Denim. Now you will add adhesive to the either end of the Dapper Denim cardstock and adhere to your card. Make sure to use a strong adhesive like Fast Fuse or Tear & Tape since people will be tugging at the waterfall and you don’t want it to pop off. Also, make sure you only add the adhesive to the outer edges and not in the middle or your waterfall won’t……fall! I added some Daffodil Delight Enamel Shapes to either side for a little texture!

Don’t worry if you are completely lost on how I created this card because I did a Video Tutorial so you can see the magic and how it all comes together. You can check that out here or click below! Don’t forget to give it a thumbs up if you liked and be sure to subscribe if you are new!!!

Happy Stampin’

~Laura

Laura's Stamp Pad

Laura Borchert ¤ Independent Stampin' Up!® Demonstrator ¤ Laura@LaurasStampPad.com

Tag Archives: Video Tutorial

Technique Tuesday – Masking a Scenery!!!

Stitched With Cheer Project Kit!!!

Tempting Techniques – Christmas Wreath!!!

Stamping with my Husband….blindfolded!!!

Technique Tuesday – Embossing Foil Paper!!!

Fun with Enamel Shapes!!!

Technique Tuesday – Jar of Love!!!

Cupcake Creations!!!

Pop Up Corner Card!!!

Technique Tuesday – Waterfall Card!!!