Feb 7 2018

A Stepped Up Candle Card!!!

Posted on February 7, 2018 by Laura's Stamp Pad

Yesterday, I shared the candle creations that can be made with the Picture Perfect Birthday Stamp Set!!! Check that one out here! Today, I’m going to show another variation of the card and a stepped up candle card version!

For this card, I went with more feminine colors! Also, rather than using designer paper, I added some ribbon! This is just to show how to get the same look but with whatever you have on hand!!! Also, I added wicks and a glow with Wink of Stella!

I started with a Peek-A-Boo Peach card base! Next, I took a piece of Berry Burst (4″ x 5-1/4″) and stamped the birthday greeting along the bottom in Berry Burst Ink! Again, be sure to start the greeting falling off the ends so that the greeting looks like it continues! Just above the greeting, I tied some Peek-A-Boo Peach Striped Ribbon around it. Next, I added this piece to the card front with Stampin’ Dimensionals! I used those so that it would look smooth since the ribbon is on the lower end!

Finally, I took a piece of Whisper White (4-3/4″ x 2-1/2″) to stamp my candles on. I used the Picture Perfect Birthday Stamp Set and Berry Burst and Peek-A-Boo Peach Ink Pads. The candles were stamped starting in the middle and working my way to the edges. Also, I did them at an angle because stamping them perfectly straight and in line would have never happened! 🙂 The flames were stamped in Crushed Curry and then I added the little star burst border along the bottom in Berry Burst!

Now for the stepped up version!!! Using a Basic Black Marker, I added little wicks to each candle. Just a simple little black mark for each candle. To finish off each flame, I went over them with the Wink of Stella Pen for some shine! I love the little bit sparkle and shine it adds! Once I finished all of the stamping, I added this piece to the card front! Just perfect!!!

Which variation do you prefer?? Yesterday’s designer series paper simple candle card or today’s ribbon stepped up with wicks and shine candle card?? Let me know in the comments below!! Also, be sure to check out the Video Tutorial showcasing all the candle fun!

Happy Stampin’

~Laura

Product List

Jan 31 2018

Lots of Lavender!!!

Posted on January 31, 2018 by Laura's Stamp Pad

Yesterday I shared a fun way to use the Lots of Lavender Sale-A-Bration Stamp Set which you can see here! Today, I’m coloring with the set!

I just love flowers and since this card doesn’t have a greeting on the front, it can be used for lots of occasions! What occasion would you use it for – Thinking of You, Sympathy, Birthday, Anniversary, etc?? Let me know in the comments below!

I started with a Whisper White card base. Next, I took a piece of Rich Razzleberry cardstock (4″ x 5-1/4″) and embossed the left side with the New Petal Pair Embossing Folder. That little side border of texture is super fabulous!! Before adding this piece of the front of the card, I wrapped some Organza Ribbon around it and tied it into a knot!

For the focal point, I took a piece of Whisper White and stamped the lavender bouquet from the Sale-A-Bration Lot of Lavender Stamp Set. It was stamped in Memento Black Ink since I used the Stampin’ Blends to color in the flowers! I used Rich Razzleberry for the lavender, Old Olive for the greenery, and Bermuda Bay for the ribbon! After coloring the flowers, I added this to a layer of Old Olive cardstock and then added it to the card front with Stampin’ Dimensionals! This gives it some more texture and a smooth look over the ribbon and embossed portion. Adding the Metallic Enamel Shapes is optional for a little bling……or necessary if you need to cover up a boo boo. I won’t say why I added them! 😉 You can guess and let me know in the comments though!

I know I love all the flower stamps but this one is super fun because it’s FREE with Sale-A-Bration and it can be colored in or stamped for color with the other images in the set! The versatility of the set is just amazing!

Happy Stampin’

~Laura

Product List

Jan 30 2018

Technique Tuesday – Some Things Are Just Meant To Be!!!

Posted on January 30, 2018 by Laura's Stamp Pad

Happy Tuesday!!! This greeting is like my favorite of all time, I think! Some Things Are Just Meant To Be…Like The Two Of You Together! Come on now, aren’t you loving this?? I think it will be great for engagement, wedding, and anniversary!

I started with a Calypso Coral card base. Next, I took the Lots of Labels Framelits and die cut some of the Lemon Lime in the Fresh Florals Designer Series Paper Stack and some Whisper White! Depending on how much you want to show between the layers, you can pick the size of framelit.

Now for the focal point, I stamped it all in Memento Black Ink! The greeting was stamped in the middle from the Petal Palette Stamp Set from the Occasions Mini Catalog and the floral edge pieces are from the Lots of Lavender Sale-A-Bration Stamp Set. Get the Petal Palette Bundle, save 10% and earn the Lots of Lavender Stamp Set for Free! How fabulous is that?!?!?! Woot woot! Using the images in the Lots of Lavender Stamp Set, I added color to the flowers with Calypso Coral and Lemon Lime Twist! The cool thing about these images are that they are textured and not a perfect match. This makes it easier to stamp and gives it a watercolor look almost. Tip: The greenery has a stamp for the top and the bottom so if it looks like it totally doesn’t line up, try the other side!!

After finishing the stamping and coloring, I added ribbon from the Sale-A-Bration Shimmer Ribbon Pack to the back as well as some Silver Sequin Trim! Simply start on one end and secure it with Stampin’ Dimensonals, run it to the other side and make a loop and secure it with Stampin’ Dimensionals. Keep filling in until you have a loop on either side and the ends on opposite sides. Once all the ribbon is secure, peel off the Stampin’ Dimensionals and add it to the card front. I had a few sequins fall off the ends so I added those around the base with the Fine Tip Glue Pen.

If you would like to see this all in action, check out the Video Tutorial below or click here! Be sure to give the video a thumbs up if you liked it and don’t forget to subscribe if you are new. If you would like a notification when I post a new video, be sure to click the bell right next to the subscribe!!! Don’t forget to check back tomorrow to see another sample using the Lots of Lavender Stamp Set!

Happy Stampin’

~Laura

Product List

Jan 25 2018

Birthday Wishes For You!!!

Posted on January 25, 2018 by Laura's Stamp Pad

Laura’s Free Stamp Set for January is the Birthday Wishes For You Stamp Set!!! This stamp set can be earned with a $75 order (before shipping and tax) placed online or at one of my events. Click here to start shopping to earn your free set!

The one thing that I love about this card is that it’s quick, simple, and can be changed up to any color you wish! If you have a lot of red cardstock on hand, make red ones. If you need masculine ones, use masculine colors! It’s so easy and fun!

First, I started with a Lemon Lime Twist card base. Then I stamped the banner greeting from the Birthday Wishes For You Stamp Set three times on the bottom right and 3 times on the upper right. The greeting was stamped twice before going back to the Basic Black Ink to give a variation of color. Notice that the third one isn’t really showing but that all depends on where it is stamped or the placement of the designer paper. If you want to stop at just stamping it twice, you certainly can!

Next, I stamped the large birthday greeting from the Birthday Wishes For You Stamp Set on a piece of Tutti-Frutti Designer Series Paper measuring 3″ x 4-1/4″ using Basic Black Ink! One ink pad makes for few supplies to get out which is even more fabulous! After stamping it, I added this piece to the center of the card. Then using some of the Pick A Pattern Designer Washi Tape, I added a strip to the top and bottom of the designer paper. I just ripped it on both ends so no need for scissors to get a nice clean cut! To finish off the card, I added some Basic Black Baker’s Twine along the inside of the card and tied it into a bow! I just love it!!!

Here is another sample in Peek-A-Boo Peach too! No matter what color, this card is just fabulous! What color would you use?? Let me know in the comments below! Don’t forget that you can earn this set for Free with a $75 order this month!!!! Click here to start shopping!

Happy Stampin’

~Laura

Product List

Birthday Wishes For You Clear-Mount Stamp Set

[145742]

Tutti-Frutti 6″ X 6″ (15.2 X 15.2 Cm) Designer Series Paper

[145606]

Pick A Pattern Washi Tape

[144166]

Basic Black Baker’s Twine

[134576]

Jan 23 2018

Technique Tuesday – Brusho Color Palette!!!

Posted on January 23, 2018 by Laura's Stamp Pad

Happy Tuesday!!! You all know what that means…..I have a fabulous technique to share with you today!!! I’m showing your how to create a Brusho Color Palette!!! I prefer to have more control and precision with my crafting so I love coloring with Brusho like this!!!

I love the rustic look of this card with that metal shine from the silver embossing and bold color from the Brusho Crystal Colour. Let’s get started!!

I started with a Island Indigo card base. Next, I layered on a piece of the Wood Textures Designer Series Paper. For the greeting, I took a strip of Pear Pizzaz cardstock and stamped the greeting from the Beautiful Day Stamp Set in the Occasions Mini Catalog. The greeting was stamped in Island Indigo Ink. Then I took some Linen Thread and wrapped it around my fingers to create the loops. I slid the loops off my fingers and placed them on the back of the greeting. Using Stampin’ Dimensionals, I secured the loops all over the back and made sure the ends were held tight. The greeting was placed on the far right side of the card!

Now for that stunning flower and amazing technique using the Brusho Crystal Colour. I stamped the flower from the Beautiful Day Stamp Set in Versamark Ink onto Watercolor Paper. Then I added Silver Embossing Powder and set it with the Heat Tool. Be sure to firmly stamp the flower since the watercolor paper is textured but of course don’t press so hard that you rock or end up with Versamark Ink all over. 🙂 It’s a delicate balance.

For the color palettes, I took a clear block, tapped a little Brusho Crystal Color onto it and added some drops of water from an Aqua Painter. Then I used the Aqua Painter to color the flower. I used the Brilliant Blue, Moss Green, and Yellow! To be honest, I prefer to use the green in this way because of the color combination used to create the green. I find that when I tap it on the purples and yellows pop too much and I prefer a more green look. After coloring the flower and allowing it to dry, I added some Stampin’ Dimensionals and placed it on the left hand side of the card!

Happy Stampin’
~Laura
Product List

Jan 18 2018

Shades of Pink Washi Tape!!!

Posted on January 18, 2018 by Laura's Stamp Pad

If you know me even a little, you know I love all shades of PINK!!! The Washi Tape Basics Pack 1 is just that and I’m in love! Don’t worry, Basics Pack 2 is shades of green and Basics Pack 3 is shades of blue. Recreate this card with any of those for lots of fun!

I started with a Berry Burst card base and layered on a piece of Flirty Flamingo measuring 4″ x 5-1/4″! Next, I took a piece of Whisper White (3-3/4″ x 5″) and added the washi tape from the Basics Pack 1. There are 5 rolls in the pack and each are a different shade, pattern, and width which makes this even more fun. I used all 5 but using just 2 or 3 would be cool too! I found that starting in the middle and working my way out was best for spacing. Ripping the ends of the washi tape made this quick and simple too!

The washi tape layer was added to the card front and then I worked on the greeting. For the greeting, I die cut the Whisper White with the Stitched Shapes Framelits and the Flirty Flamingo with the Layering Ovals Framelits. I used the greeting from the Jar of Love Stamp Set and stamped it in Berry Burst Ink. Then I placed the greeting upside down and placed some Berry Burst Metallic Edge Ribbon on one end with a little bit peaking out. I added a Stampin’ Dimensional to hold it in place. Then I took it across and looped it on the opposite side of the oval and secured it with another Stampin’ Dimensional. I did this until I had two loops and the ends on opposite sides. I added a few more Stampin’ Dimensionals to even things out and make sure I had it all secure. I’m an over user of those things anyway! Then I added the greeting to the card front and finished it off with some Rhinestone bling!!!

What Pack of Washi Tape would you use the most – Pinks, Blues, or Greens?? Let me know in the comments below!

Happy Stampin’

~Laura

Product List

Basics Pack 1 Washi Tape

[144221]

Berry Burst 3/8″ (1 Cm) Metallic-Edge Ribbon

[145489]

Stitched Shapes Framelits Dies

[145372]

Layering Ovals Framelits Dies

[141706]

Jar Of Love Photopolymer Stamp Set

[141587]

Berry Burst Classic Stampin’ Pad

[144083]

Jan 17 2018

Black & White With A Pop of Red!!!

Posted on January 17, 2018 by Laura's Stamp Pad

Last week, I showed off the NEW Brusho Crystal Colour and ways to color with it!!! This fabulous black & white with a pop of red was created using the Brusho Crystal Colour as well! That vibrant background

I started with a Whisper White card base. Next, I layered on a piece of Silver Foil Paper measuring 4″ x 5-1/4″ and Petal Passion Designer Series Paper (3-3/4″ x 5″). This can all be done while waiting for the focal point to dry! 🙂

Using a piece of Watercolor Paper measuring 3-3/4″ x 3″, I wet the entire thing with an Aqua Painter. Then I tapped the Red Brusho Crystal Colour over the top. A little bit goes a long way…..trust me. I love bold vibrant colors and like 8 drops of the powder is perfect! At this point, I used the Aqua Painter to color in the entire piece of paper. If you wish to have a more swish swish look or just the dotted looked, leave it as is. It really is fun how many different ways it can be used! After allowing it to dry, I stamped the dots from the Beautiful Day Stamp Set in Versamark all over. Then I poured Clear Embossing Powder over the top and set it with the Heat Tool. This is how I got those shiny dots!

Next, I added some Silver Metallic Edge Ribbon around the card and tied the two ends on the right hand side with a little bit of Silver Metallic Thread. For the greeting, I stamped it from the Beautiful Day Stamp Set in Basic Black Ink. I used the Pretty Label Punch to get those nice rounded ends. After stamping the greeting, just turn the punch upside down and slide the greeting in from the top so only one side is in the punch. Punch and then rotate to do the other side. I added the greeting with Stampin’ Dimensionals and used them to add the watercolor paper to the card front!

Check out the Post & Video I posted last week to see more on Brusho Crystal Colour and tips and tricks!

Happy Stampin’

~Laura

Product List

Jan 16 2018

Technique Tuesday – Blending Butterflies!!!

Posted on January 16, 2018 by Laura's Stamp Pad

Happy Tuesday!!! You all know what that means…..I have a fabulous technique to share with you today! I’m blending butterflies with Watercolor Pencils and a Blender Pen and oh how stunning do they look……

Don’t you think this looks super real and gorgeous?? I love it! Then I did the blue/purple one for the video and fell deeper in love!!! There are so many ways to color stamped images and while the latest one is fun, sometimes its great to play with your favorite. I have colored this butterfly with the New Brusho Crystal Colour (see here) and now I did this one. Honestly, I think I prefer Watercolor Pencils! I try to mix things up and try it all to show you!

The card base is Daffodil Delight. Then, I took a piece of Whisper White (3-7/8″ x 5-1/8″) and stamped the butterfly and greeting from the Beautiful Day Stamp Set from the Occasions Mini Catalog! I used Archival Black Ink since I am watercoloring. Next, I used the Watercolor Pencils and just added in some color. I used Real Red, Pumpkin Pie, and Daffodil Delight for this card!

After adding all the color, I started with the lightest and blended with the Blender Pen. I kept the yellow in place in the center. Then I blended and smeared around the Pumpkin Pie. Making sure to clean the pen tip in between so the color didn’t super mix together. Then I blended the red starting on the outside and then smearing with the orange in middle. I just love how it turned out!

Next, I layered this piece onto some Basic Black measuring 4″ x 5-1/4″. I tied some Basic Black Shimmer Ribbon around it between the butterfly and greeting for a little pop and texture. Then I added this piece to the card front with Stampin’ Dimensionals!!!

Here is the finished card from the one I did on the video below! I used Pacific Point, Bermuda Bay, and Rich Razzleberry for this one! LOVE IT!!! Which one is your favorite – Yellow/Red/Orange or Blues/Purple?? Let me know in the comments below!

Happy Stampin’

~Laura

Product List

Basic Black Archival Stampin’ Pad

[140931]

Beautiful Day Clear-Mount Stamp Set

[145915]

Watercolor Pencils

[141709]

Blender Pens

[102845]

Basic Black 3/8″ Shimmer Ribbon

[144129]

Jan 15 2018

You Are The Best!!!

Posted on January 15, 2018 by Laura's Stamp Pad

Happy Monday!!! I hope you all had a wonderful weekend!!! Today’s I’m sharing this “You Are The Best” card which is perfect for Valentine’s Day without being all lovey dovey! It can also be used any time of the year!!!

This card was super simple and with the fabulous Sale-A-Bration Happy Wishes Stamp Set you can mix and match greetings! This is one of the stamp sets that you can get for FREE with a $100 order. This set has 16 stamps in it. There is a large “best” and “happy” and then lots of greetings that coordinate. I love it! Stamp the large greeting in black or gray and color it in or just stamp it in any color!

I started with a Whisper White card base measuring 4-1/4″ x 11″. The fold is on the left hand side and I went with this style so that I could tie the ribbon around the left side. This way I used less ribbon than if I wrapped it around the 5-1/2″ part of the card. I used the Fresh Fig Sheer Ribbon and tied it around to the inside of the card and into a knot on the front! Next, I layered on a piece of the Painted With Love Specialty Designer Series Paper measuring 4″x 3″. With this size divisible by 12″, I got 12 of these pieces out of one sheet.

For the greeting, I used the Layering Ovals Framelits. The scallop circle was cut in Melon Mambo and the the smooth oval in Whisper White. Then, I stamped the greeting from the Happy Wishes Stamp Set in Fresh Fig Ink. I added the greeting to the card front with Stampin’ Dimensionals! I love being able to mix and match the greeting to create lots of different styles of cards like this. Another fun change, I used Gold Metallic Ribbon and Calypso Coral Sheer Ribbon on other samples! I love having the ability to mix and match!

Want to check out more samples using the Painted With Love Designer Paper, click here!

Happy Stampin’

~Laura

Product List

Painted With Love Specialty Designer Series Paper

[145580]

Fresh Fig 1/8″ Sheer Ribbon

[144174]

Layering Ovals Framelits Dies

[141706]

Fresh Fig Classic Stampin’ Pad

[144082]

Happy Wishes Clear-Mount Stamp Set

[147227]

Jan 11 2018

Valentine’s Day Card Ideas!!!

Posted on January 11, 2018 by Laura's Stamp Pad

Today, I’m sharing with you some Valentine’s Day card ideas!!! I love Valentine’s Day because I feel like it’s a great chance to show your love, happiness, appreciation (whatever it may be) to those around you. I’m not a fan of the roses and chocolates but the CARD is a must!!!

Here is a great concept using the Painted With Love Specialty Designer Series Paper from the Occasions Mini Catalog! It’s not super lovey dovey but still shows love!

I started with a Melon Mambo card base. Next, I cut 2 pieces of the Painted With Love Specialty Designer Series Paper measuring 5″ x 2″ and 3″ x 2″! I used the same sheet of 12″ x 12″ from the pack but used one side for one piece and the other side for the other piece! The larger piece is layered on Rich Razzleberry measuring 5-1/4″ x 2-1/4″. The smaller piece is layered on Gold Foil Paper measuring 3-1/4″ x 2-1/4″. I just love how this designer paper has those gold flecks in it. It is just stunning! Before adding the rectangles to the card, I stamped the greeting from the Special Celebrations Stamp Set in Rich Razzleberry Ink. The greeting is a bit tight so it’s best to stamp it first. Next, I layered on the piece to the left. The smaller piece has some Calypso Coral Sheer Ribbon wrapped around it and tied into a knot. Then I added this to the card front with Stampin’ Dimensionals for a little bit of texture. I finished off the front with a few Metallic Enamel Shapes.

For the inside of the card, I added a piece of Whisper White (4″ x 5-1/4″) and stamped the second piece of the greeting on it.

If you would like to see this all in action as well as a few other Valentine’s Day cards, check out the Video Tutorial below or click here! Be sure to give the video a thumbs up if you liked it and don’t forget to subscribe if you are new. If you would like a notification when I post a new video, be sure to click the bell right next to the subscribe!!! Let me know if you have any tip and tricks to share in the comments below!

Stay tuned as I will be posting the other cards in the video next week!!!