Technique Tuesday – One Sheet Wonder Flower Bouquet!!!

Posted on

Happy Tuesday!!! You know what that means…..I have a fabulous technique to share with you today! This isn’t a new one but it is with a new look! I know how much you all love my One Sheet Wonder Techniques so I am sharing another fabulous one!

Flower OSW, www.LaurasStampPad.com

Look at these beauties!!! You all know I love flowers and this paper from the Birthday Bouquet Designer Series Paper Stack is amazing!!! What better way to use this amazing paper than with a One Sheet Wonder Technique so you can use every bit of it and both sides!! I made 14 cards with this ONE piece of 12″ x 12″ paper. Here is the template!

12 x 12 One Sheet Wonder Template

I have modified it a little bit but cutting 2 pieces of 2″ x 5-1/2″ with that leftover gray piece on top. Also, I don’t always cut those little bits off in the second row either. You can do whatever you want to create these amazing cards!

Birthday Bouquet OSW, www.LaurasStampPad.com

These 6 cards were created with most of the bottom row on the template and those 2 pieces cut from the top gray portion. Quick and simple cards. I looked at the list of colors that are printed on the Designer Series Paper Pack for card bases – Blushing Bride, Mint Macaron, and Pool Party. I pulled out some scraps of each of those colors as well to use for layering and the greetings.

Diagonal Designer Paper, www.LaurasStampPad.com

Here are the 2 samples using that far right corner. I just ripped it corner to corner and added it to my card base. I stamped the greeting from the Rose Wonder Stamp Set and added some ribbon – Whisper White Cotton Ribbon and Venetian Trim.

One Sheet Wonder Squares, www.LaurasStampPad.com

You can always leave the square pieces as strips if you don’t like this look. Here I took the little squares and backed them with cardstock for a little extra pop of color. I added some Linen Thread to the one in the middle.

Quick and Simple OSW, www.LaurasStampPad.com

Here I used some of the strips from the 2nd row on the template. You will notice that the Thoughts & Prayers image doesn’t fit in the Decorative Label Punch so I used that greeting when I could stamp it directly onto the card. I love how you can mix and match and create so many amazing cards so quickly!

If you would like to see this all in action, check out the Video Tutorial below or click here! Be sure to give it a thumbs up if you liked it and don’t forget to subscribe if you are new! I post every Tuesday and Thursday!

If you would like to see other One Sheet Wonder samples, click here, here and here! This technique is perfect for whipping up lots of cards quickly and beautifully!

Happy Stampin’

~Laura


Ice Cream Cones!!!

Posted on

Ice Cream Cones, www.LaurasStampPad.com

You have noticed how I LOVE the Birthday Bouquet Designer Series Paper as I have been posted a lot of samples using it!! Check those out here, and here! Of course I had to do a cute card with the ice cream cones!! I LOVE a good waffle cone….more than the ice cream actually!!! Mmmmm.

For this card, I started with a Mint Macaron card base, layered on Tip Top Taupe (5-3/8″ x 4-1/8″) and then the Birthday Bouquet Designer Series Paper (5-1/4″ x 4″). I tied some of the Tip Top Taupe Lace Trim around the card and into a knot. I love how that ribbon puffs out so much. Super fun! For the greeting, I stamped it in Mint Macaron Ink from the Tin of Cards Stamp Set and punched it out with the 2″ Circle Punch. I layered this onto a 2-3/8″ Scallop Circle Punch of Blushing Bride. I added the greeting to the card with Stampin’ Dimensionals because I love them and because it helps adhered better on top of the ribbon. I love it!!

Be sure to grab the Retiring items before they are gone on June 1!

Happy Stampin’

~Laura


Paper Pumpkin Flower Stamps!!!

Posted on

Paper Pumpkin Flowers, www.LaurasStampPad.com

I don’t play with my Paper Pumpkin Stamp Sets much after I do the kit….it’s kind of sad isn’t it???? These sets are super fun and I love using them for the kit but then they go in a box and I forget about them! 🙁 I saw a sample similar to this one and just HAD to pull that stamp set back out of the box! I love it!!!! You can do this in soooo many different color combinations!

I started with a Whisper White card base and stamped the flower from the March Paper Pumpkin Kit in Tangerine Tango and the leaves in Cucumber Crush! I went across the card front diagonal and it totally looked like a twisted ribbon where it went wide every inch or so. The more I tried to fix it, the more it just looked the same only wider so I stopped. For the greeting, I used the same set and stamped it in Tangerine Tango. I punched it out with the Decorative Label Punch and the sponged the edges with Cucumber Crush and a Sponge Dauber! I wanted a little pop of color to off set the greeting. I added a little loop of Cucumber Crush Lace Trim behind the greeting and adhered it to the card with Stampin’ Dimensionals! Love it!

This card is quick and simple and fairly cheap to create since there aren’t any layers, not a lot of adhesive and scraps of ribbon and cardstock can be used for the greeting! You can change the colors to make the recipient’s favorite color!!! I can’t wait to try purple!

What color would you use to create this card? Let me know in the comments below! If you want to see more samples of Paper Pumpkin, click here! If you would like to get your own Paper Pumpkin Kit, click here to get signed up for the June Kit!

Happy Stampin’

~Laura

Ribbon Retire

Be sure to check out the Retiring Items before they are gone at the end of May!


Stars and Dots One Sheet Wonder!!!

Posted on

Stars One Sheet Wonder, www.LaurasStampPad.com

I know you all love my One Sheet Wonders as much as I do! It is a great way to make A LOT of cards quickly and with your favorite Designer Series Paper. This sheet that I used above from the It’s My Party Designer Series Paper Stack is AMAZING. I started screaming the moment I saw it and knew I needed to save it for a special project. The One Sheet Wonder Technique is perfect because there is very little leftover and I can use both sides! I got all 14 of these cards out of one sheet of 12″ x 12″ Paper.

One Sheet Wonder, www.LaurasStampPad.com

These 6 cards were all created with the 5-1/2 pieces! Some of them I added a layer of cardstock in Whisper White, Melon Mambo or Crushed Curry. The greetings are from the Tin of Cards Stamp Set! I went with basic greetings for this! I added some Whisper White Baker’s Twine, Crushed Curry Baker’s Twine and Whisper White Cotton Ribbon to a few of them!

OSW Stars, www.LaurasStampPad.com

For the greetings, I used the Oval Punch and the Scallop Oval Punch (both retiring). I love using the Decorative Label Punch as well which isn’t retiring. Thank goodness!

One Sheet Wonder Dots, www.LaurasStampPad.com

I love the little squares and think they look super fun! You could always leave them in a strip and use it like the samples above! The Hello greeting on the far left is from the Watercolor Wishes Stamp Set!

One Sheet Wonder Diagonal, www.LaurasStampPad.com

These 2 cards use the largest piece (4-1/4″ x 5-1/2″) and I ripped it diagonally! Love the bright colors.12 x 12 One Sheet Wonder TemplateHere is the template that I use. I always like to modify it up and have fun with it. On these cards, I didn’t cut off each of those little slivers on the second row. Also, I cut the top gray portion into 2 pieces measuring 5-1/2″ x 2″. That is how I got the full 14 cards!

I love how you can create quick and simple cards with just a few colors of cardstock, 1 sheet of Designer Paper, your favorite greeting set and some embellishments!

If you would like to see this in action, check out my Video Tutorial below or click here! Be sure to give it a thumbs up if you liked it and don’t forget to subscribe if you are new!

Let me know which Designer Series Paper you can’t wait to try this technique out with in the comments below! Stay tuned as I have another set of cards coming soon using paper from the Birthday Bouquet Pack!

Happy Stampin’

~Laura

Project Life Retire

Be sure to check out the Retiring Items before they are gone at the end of May!


You are Tea-Riffic!!!

Posted on

Tea-riffic Time, www. LaurasStampPad.com

I love the colors in this card and the adorable greeting! I am really loving the patterns in the Have a Cuppa Designer Series Paper Stack! The colors are fun and the patterns are subtle enough that you can layer them and use them as a great background!

I started with a Whisper White card base and added a piece of the Have a Cuppa Designer Series Paper measuring 4″ x 5-1/4″. Then I wrapped some Crushed Curry Baker’s Twine around twice and tied it into a bow. I always double knot it before creating the bow so that it is nice and tight on my card! I stamped the cup from the A Nice Cuppa Stamp Set in Crushed Curry onto Whisper White and die cut it with the coordinating framelits that are no longer available. Have no fear, the lines are pretty easy and fussy cutting won’t kill you! 🙂 After cutting it out, I stamped the little heart from the same set twice on the cup to add a little subtle design since it is Crushed Curry on Crushed Curry.

A Nice Cuppa Paper, www.LaurasStampPad.com

I added another piece of the Designer Series Paper measuring 2-1/2″ x 3-3/4″ to the card front and then placed the cup on top with Stampin’ Dimensionals! Then I took a scrap piece of the Designer Series Paper that is 1/2″ wide and I ripped both ends to make it look like Washi Tape! How cute is that? It is a great way to use up little scraps of Designer Series Paper. Love it! For the greeting, I stamped it from the A Nice Cuppa Stamp Set in Basic Gray. I cut it with the Washi Label Punch (sold out as well). Once you punch it out on one end, you can slide it back in the punch to make the image shorter. How cool is that? I added the greeting to the card with Stampin’ Dimensionals as well! Simple, fabulous, and a great way to use lots of Designer Series Paper!

Happy Stampin’

~Laura

Project Life Retire

Be sure to check out the Retiring Items before they are gone at the end of May!


Washi Label Fun!!!

Posted on

Washi Label Fun, www.LaurasStampPad.com

This card is quick and simple and uses all of those little scraps of Designer Series Paper that are left behind. I love that! I used the Have a Cuppa Designer Series Paper from the Occasions Mini Catalog for this card!

I started with a Rose Red card base and added a piece of Have A Cuppa Designer Series Paper measuring 3-3/4″ x 5″. I went with a basic pattern for the background since I used lots of colors and patterns of the focal point. I took all the scraps from that same stack that I had left over from other cards and punched out pieces with the Washi Label Punch (no longer available). I punched out 4 from the Designer Series Paper and 1 from a scrap of Whisper White. I stamped the greeting from One Big Meaning in Bermuda Bay onto the white one! I added all of the DSP pieces with Snail Adhesive and I popped up the greeting with Stampin’ Dimensionals! Simple and fabulous!!! You can use up all of your DSP scraps with this card style!

Happy Stampin’

~Laura


Technique Tuesday – Decorative Corner Card!!!

Posted on

Happy Tuesday!!! That means I have a fabulous technique to share with you today! This one is super fun because it’s a Box and a Card and it still fits into a regular Medium Envelope! I think this one is super simple and fun! You can check out another box card here!

Birthday Box Card, www.LaurasStampPad.com

Look how fabulous it is? It is so hard to show 3D in a photo so I have a few and of course a Video Tutorial!!! 🙂 I got this idea from a fellow demonstrator – Linda Yearsley at one of our Team Meetings. Linda got the idea from Debbie! A big Thank You to both ladies for the fabulous idea! Now let’s get started!

SUPPLIES NEEDED: Stampin’ Trimmer, 1″ Circle Punch, Designer Paper of your Choice

There aren’t a lots of tools needed for this fun card! You will start with a normal card base measuring 5-1/2″ 8-1/2″ and you will want to score it along the 8-1/2″ side at the following measurements – 2-1/8″, 4-1/4″, 6-3/8″. This will create 4 panels of the exact same size. You will fold on all of the score lines and be sure to use a Bone Folder for a nice strong crease! Now you will need your layers to decorate your panels. You will need four solid cardstock panels measuring 5-1/4″ x 1-7/8″. I used Marina Mist in this sample! Then I used some of the It’s My Party Designer Series Paper for the next layer on the panels. You only need three panels of Designer Series Paper and one Whisper White all measuring 5″ x 1-5/8″. The white panel will be on the back side for you to write on. This is like the “inside of the card.” Once all of these pieces are on your card base, it is time to seal it into a box! You will need a piece of cardstock in the same color as the card base measuring 1″ x 5-1/2″ and you will score it or fold it in half at the 1/2″ mark. Add adhesive to both panels (same side) of this small piece. You can use Tear & Tape or Fast Fuse. I used both on mine and they held together really well so it is all up to you! Now you will add one side of the strip to one end of the card base. Then lay your card flat and press the other end of the card base to the other side of the strip. I always like to lay it down and press it because then I know it will lay flat when I go to mail it.

Back of Box Card, www.LaurasStampPad.com

Now that you have your box, it’s time for the decoration. To get it to POP out on the corner, you will need two circles using the 1″ Circle Punch in the same color as your card base! Fold the circles in half. Add a Stampin’ Dimensional to one of the halves of the circle and then use Fast Fuse on the half. With the Fast Fuse side, place it with the crease (fold) right next to the corner fold of the card. You will do both circles like this on either sides from each other and on either side of the crease on the box card.

Pop Out Box Card, www.LaurasStampPad.com

Then you will peel off the backs of the Stampin’ Dimensionals and place your greeting on top! For the greeting, I punched out a Basic Black 2-3/8″ Scallop Circle and a Marina Mist 2″ Circle! I stamped the greeting from the Tin of Cards Stamp Set in Mint Macaron and punched it out with the 1-3/4″ Circle Punch! I also used the star from the Tin of Cards Set to stamp the back panel as well. You could use all kinds of Punches or Framelits for your greeting piece! I love it!!

If you would like to see this all in action because I have you totally confused, check out the Video Tutorial below or click here! I hope you aren’t confused after this! If so, remember you can always ask me for tips or suggestions if you need help! I am happy to help! Don’t forget to give this video a thumbs up if you liked it and be sure to subscribe!

Happy Stampin’

~Laura

Ribbon Retire

Be sure to check out the Retiring Items before they are gone at the end of May!


Graduation Thank You Notes!!!

Posted on

Thank You Starburst, www.LaurasStampPad.com

It is always great to have Thank You Notes on hand. I send out tons of them each month to everyone who orders from me during that month and I always send thank you notes for any gifts I receive! You could always change up the greeting with the same set and put “A Happy Hello” which is perfect for a little note to let someone know you are thinking of them! I made these cards for my Niece who is graduating 8th Grade this year! Auntie Laura is going to make sure she sends thank yous to everyone!

Top Starburst, www.LaurasStampPad.com

I created these cards with Whisper White card bases and stamped the starburst from the Perpetual Birthday Calendar Stamp Set in Real Red. Red is her school color! I stamped some diagonal, some on the sides, and some top and bottom! For the greeting, I stamped the Thank You from the Tin of Cards Stamp Set and punched it out with the 1-1/2″ Circle Punch! Then I layered it onto a Real Red 1-3/4″ Scallop Circle Punch! I added the greeting to the card with Stampin’ Dimensionals!

Side Starburst, www.LaurasStampPad.com

Of course I had to add some POP to the envelopes as well so I stamped the starbust on the envelope flap!! Amazing!!

Diagonal Starburst, www.LaurasStampPad.com

You can always change up the image for any occasion as the Perpetual Birthday Calendar Set has flowers, stars, leaves, snowflakes, hearts, butterflies and more! I love this set for backgrounds!!!

Happy Stampin’

~Laura

Project Life Retire

Be sure to check out the Retiring Items before they are gone at the end of May!


My Amazing Mother!!!

Posted on

My Amazing Mother, www.LaurasStampPad.com

I love love love this card for so many reasons – the beautiful colors, the bright butterflies, the rustic wooden background, a little gold bling, and the greeting reminding me of My Amazing Mother!!!! You could always change up the greeting for any occasion! Let’s get started on this beauty!

I started with a Crumb Cake card base and I stamped the Hardwood Stamp on the background in Crumb Cake ink! Then I took scrap cardstock of Hello Honey, Delightful Dijon, Watermelon Wonder and Calypso Coral and punched out the butterfly with the Elegant Butterfly Punch. Be sure to punch away from the edges so you can then punch out the circle. Once the butterfly is punched, take the 2″ Circle Punch and center the butterfly (hole) in the middle of the punch! This will create all of those rings shown above. I have you punch out the butterfly first because it would be hard to center the already punched circle into the butterfly punch! Next up, you will need 2 Whisper White 2″ Circles and 2 Designer Series Paper 2″ Circle. I used some neutral striped paper from the Love Blossoms Designer Series Paper Stack in the Occasions Mini Catalog. I stamped the large butterfly from the Papillon Potpourri Stamp Set in the middle of the white circles in Delightful Dijon and Calypso Coral. If you stamp the butterfly in the middle as best you can, it should line up that the butterfly is in the punched portion of the coordinating color. If it doesn’t line up, you can always line it up and trim the access. So now your Delightful Dijon and Calypso Coral butterflies are all done.

Beautiful Butterflies, www.LaurasStampPad.com

For the other two, I stamped the smaller butterfly from the Papillon Potpourri Stamp Set onto scrap white paper in Hello Honey and Watermelon Wonder. Then I punched them out with the Bitty Butterfly Punch. Then I took some Gold Thread and wrapped it around three of my fingers 10-15 times. When I pulled the loops off of my fingers, I twisted them in the center and placed the center on the back of the Bitty Butterflies and stuck a 1/2 of a Stampin’ Dimensional (or some of the border piece) over the top of the thread. This will hold the thread in place and stick the butterfly to the project. Once your butterflies are ready, you will adhere the Designer Series Paper to the back of the butterfly frames and then place the bitty butterfly in the middle of the punched butterfly. I hope all of this hasn’t completely confused you and if it has, check out the Video Tutorial below! 🙂 Now you have all of your butterfly decoration complete and you can add them to your card front. From Left Top to Right Bottom – Hello Honey, Delightful Dijon, Calypso Coral, and Watermelon Wonder! For the greeting on the bottom, I stamped the image from Greatest Greetings onto scrap white cardstock in Watermelon Wonder. I cut the little banner ends and added it to the card with Stampin’ Dimensionals! If you are wondering what to do with the 4 Elegant Butterflies that you punched out, you can always decorate the inside of the card!

Mother's Day, www.LaurasStampPad.com

And if you are super lost on the directions above or if you just like to see it all in action, check out the Video Tutorial below or click here! Don’t forget to give it a Thumbs Up if you liked it and be sure to Subscribe if you are new! The New Catalog Product Reveal Video is coming soon but I’m not sure when…..make sure you subscribe so you don’t miss it! 🙂

What occasion would you use this card for? Birthday, Wedding, Just Because, Mother’s Day, Sympathy? Let me know in the comments below! I can’t wait to give this card to my mom. I super love it and I love her so I’m excited! 🙂

Happy Stampin’ and Happy Mother’s to all of the women out there who have given birth to a child, wish to give birth to a child, have a fur baby or are motherly to those they meet! You are all amazing and should celebrate this special day! Hugs!

~Laura


Anniversary Love!!!

Posted on

Anniversay Card, www.LaurasStampPad.com

This past Saturday was my 5 Year Wedding Anniversary. You may have heard me say I don’t typically make card specifically for each person. I do pick out specific cards from stash for people though. Well when it comes to my hubby, Brad, I do make it special. We had a busy week last week and on Friday night we both didn’t have our cards. He went shopping for one and said nothing jumped out at him so he was going to make one as well. I said should we go to the stamp room and have a craft night. He said no because you are done so much faster than me…….well that was the jinx he put on me. He said his card was quick and let me tell you I spent over an hour on this one. I was like a kid in a candy store going through all my options and thinking it through like it was a life or death situation. In the end I think it turned out perfect and I love it!

I used Old Olive as a the card base and embossed 3 pieces of Whisper White (4″ x 5-1/4″) with the Decorative Dots Embossing Folder. For the front panel, I tied the knot of Melon Mambo Cotton Ribbon around it and added it to the card base. The other two panels went on the inside. I used the Number of Year Stamp Set and Large Numbers Framelits for the greetings and numbers. Bundle & Save 15% I layered the number 5 on the Decorative Label Punch and added a layer behind it as well to really make it pop. Check out this video on how to create that look! I thought it needed a bit more so I added some flowers using the Petite Petals Punch. The leaves are just 2 of the flower petals……how cute!?!?!?! I added a little Black Candy Dot to the center of the flowers!

Number of Years, www.LaurasStampPad.com

I snapped a picture of the inside before I wrote in it. I did the numbers in Melon Mambo with the Large Number Framelits. I added little banners next to each one with little notes of love on them. I brushed the edges of the banners with my Sponge Daubers in Melon Mambo and Old Olive for more pop of color!!! I really like how it turned out!!!

Domo Anniversary, www.LaurasStampPad.com

Here is Brad’s Card to me! He cheated a little and printed the Domo on the card front. He then punched out the hearts and added them to the card with Stampin’ Dimensionals. The first thing I noticed was the 5 hearts for our 5 year anniversary. Brad said that wasn’t on purpose. LOL I love it!!!

You can check out some of our other cards to each other here, here and here!

Happy Stampin’

~Laura

Project Life Retire

Be sure to check out the Retiring Items before they are gone at the end of May!