Sep 29 2016

Halloween One Sheet Wonder!!!

Posted on September 29, 2016 by Laura's Stamp Pad

Halloween is right around the corner and I know how much you all love One Sheet Wonders!!! By request from one of my YouTube Subscribers, I have created a Halloween One Sheet Wonder that includes cards and treats!!! I love this set and it is perfect for having a few cards on hand to send to loved ones and a few treats for trick-or-treats or nieces and nephews in my case!!! Let’s get started!

Here is the template I used for this Halloween Set. You might remember that the bottom row is the same as the other template. You can check out samples of that here, here, here, and here! I used the bottom row for all of the 6 cards.

The paper I used is from the Holiday Mini Catalog and it is called Halloween Night. Since I am not a huge Halloween fan, I purchased this paper and used a all occasion greeting set I have on hand and made these beauties. I used Pumpkin Pie and Smoky Slate for the card bases and pulled out some Basic Black scraps for layering. TIP: The black just lines the edge of the Designer Paper, not the entire portion. This is how you can use up those little pieces of scraps. The bottom middle card was created using the 1-3/4″ x 5-1/2″ and I cut it to 4-1/4 to go sideways on the card. Since it wasn’t that wide, I cut it in half and added a piece up high and down low and put a strip of Basic Black in the middle! 😉 See there are so many ways you can create fun cards with the One Sheet Wonder Technique! The greetings were all stamped with the Teeny Tiny Wishes Stamp Set and punched out with the Classic Label Punch. I wanted a larger greeting to pop more on the card so I layered that onto the Decorative Label Punch and added loop of Metallic Black Thread behind it. I added some Enamel Shapes to a few of them! I love those things!

The top row is for these adorable treat boxes using the Clear Tiny Treat Boxes. I took each of those 2″ x 6″ pieces and scored them just a hair below the 2″ mark and 4″ mark so they would fold into the box. Since the box is 2″, you want to go a smidge less so it fits inside. Pop the Designer Paper into the box and add candy! For the outside decoration, I used Burlap Ribbon and Thick White Baker’s Twine. I stamped the For You from the Perfectly Wrapped Stamp Set and punched it out with the Classic Label Punch. I thought it looked too long for the tiny box so I cut one end off, punched a hole with the 1/8″ Handheld Punch and tied it to the treats with Black Metallic Thread. Love it! They do hold a decent amount of candy but they are so adorable!!!

So 6 cards and 6 treat boxes from 1 sheet of 12″ x 12″ Designer Paper is super fabulous and if you want to see the Video Tutorial of all of this, check out the one below or click here! Don’t forget to give it a thumbs up if you liked it and be sure to subscribe if you are new!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO Offer ends on October 10th!

Sep 28 2016

Part 2: Double Z Fold Frenzy

Posted on September 28, 2016 by Laura's Stamp Pad

Yesterday I posted the fabulous Fall Single Z Fold Card and today I am going to show you a Double Z Fold Card!!! I just love the pop out piece and the Candy Cane Suite with the little Gingerbread Men!!! LOVE IT!!!

Isn’t it precious??? I love love love this card!!! Also, my sample has the blank white rectangle but during Club the ladies stamped the greeting from the Cookie-Cutter Christmas Stamp Set “Warm Heartfelt Greetings For a Very Merry Christmas” and it fits perfectly. Precious!!!! Now let’s get started!!!

So this card starts off the same as the Single Z Fold from yesterday. Start with a Real Red card base measuring 11″ x 4-1/4″ and scored it at 2-3/4″ and 5-1/2″. These are the measurements of folding the card base in half for a normal card and then folding the front of the card back (in half) to create the “Z”. Now it is time to decorate. The front panel has a Whisper White layer measuring 2-5/8″ x 4-1/8″ and I added some of the Candy Cane Lane Designer Washi Tape to the top and bottom. The greeting is from the Candy Cane Christmas Stamp Set and I stamped it in Crumb Cake Ink towards the top so it wouldn’t be covered up by the second Z fold. Adhere this piece to the front panel. On the inside, I layered some of the Candy Cane Lane Designer Series Paper (4″ x 5-1/4″) onto Whisper White (4-1/8″ x 5-3/8″) and adhered it down.

Now it is time for the second Z. All you need to do is take a strip of cardstock, score it the same as above and add it to your card opposite folds as the base. I used Real Red cardstock measuring 11″ x 1-1/4″ (you can go as wide as you wish) and scored it at 2-3/4″ and 5-1/2″. Fold it like a Z and the long panel will go across the front (sticking to the left side) and the short panel will adhere to the back right hand side. I added some of the Candy Cane Lane Washi Tape down the center of the strip and added a little white rectangle on the end which you can stamp on or leave blank to write on it. The little gingerbread men were stamped from the Cookie-Cutter Christmas Stamp Set and punched with the coordinating Cookie-Cutter Builder Punch (Bundle & Save 10%). Be sure that when you adhere them to your strip, you only add adhesive in the middle of his body. Otherwise you will have them stick to the back of you card and it won’t open. For the little red hearts, you can either use Enamel Shapes or you can punch out a red heart with the Cookie-Cutter Builder Punch. So precious!!!

You can check out the Video Tutorial that went up yesterday with the Single Z Fold by clicking here!!! Let me know in the comments which one you like more – the Single or the Double? The Fall or the Christmas? I would love to hear from you!!!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO Offer ends on October 10th!

Sep 22 2016

Lovely Layers!!!

Posted on September 22, 2016 by Laura's Stamp Pad

I am loving these rich colors in the Petals & Paisley Specialty Designer Series Paper Pack. I am so not a fan of Delightful Dijon but together with these colors, I’ll use it!!! Thank you Stampin’ Up for helping me branch out!!!

I started with a card base of Rich Razzleberry and added the Petals & Paisley Specialty Designer Series Paper to the front. The paper does it all that you don’t need much more so I went simple. I stamped the greeting from the Paisleys & Posies Stamp Set in Rich Razzleberry onto Very Vanilla cardstock. Isn’t that greeting just amazing? I love it! It is perfect for an anniversary card or thinking of you card or random card you send to brighten someone’s day. Then for the focal point, I stamped various circle images from the same stamp set onto scrap vanilla paper and die cut them with the coordinating Paisley Framelits (Bundle & Save 10%). I stamped the first (biggest one) in Mint Macaron onto the greeting piece. The next layer is in Delightful Dijon and I adhered that one with Snail Adhesive. The next layer in is Rich Razzleberry and I added it to the card with a Stampin’ Dimensional for more texture and dimension. The last layer was stamped in Mint Macaron and added with Snail Adhesive. I finished it off with a Night of Navy Enamel Shape. It’s so beautiful and easy!!! I love it!

I added a few more Enamel Shapes around the greeting to make it pop more! The Paisleys & Posies Stamp Set is so versatile. There are lots of ways you can use it. Check out more samples here, here, and here!

If you would like to see this in action, check out my Video Tutorial below or click here. Don’t forget to give it a thumbs up if you liked it and be sure to subscribe if you are new. I post videos every Tuesday and Thursday. Subscribe to my blog for a post every Monday through Friday!!!!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Sep 21 2016

Petals & Paisleys!!!

Posted on September 21, 2016 by Laura's Stamp Pad

Stampin’ Up really makes some amazing Designer Series Paper. It steals the show and makes simple cards like these stunning!!! The color combination in the Petals and Paisleys Designer Series Paper is making me work outside the box but I am loving it. I never cared for Delightful Dijon until now!

I started with a Mint Macaron card base. Then I layered some of the Petals & Paisleys Designer Series Paper (3-3/4″ x 5″) onto Delightful Dijon cardstock and added some Mint Macaron Ribbon from the Trio Pack. I just laid the ribbon across the front and secured the ends on the back side and adhered it to the card base. For the greeting, I die cut one of the labels from the Lots of Labels Framelits. I stamped the greeting from the Paisleys & Posies Stamp Set in Rich Razzleberry Ink. I thought it needed a little bit more so I stamped the leaf from the same set in Mint Macaron on the top and bottom! It is the perfect accent. I added the greeting to the card front with Stampin’ Dimensionals. Simple and fabulous!!!

If you would like to check out more samples using the Petals & Paisleys Suite, check them out here and here!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Sep 12 2016

Thankful~Grateful~Blessed

Posted on September 12, 2016 by Laura's Stamp Pad

This card is super fabulous because I love the greeting. It is perfect for Thankgiving but for all year long as well. There is so much to be thankful for. I am so blessed each and every day. I just love it!!!

I started with a Very Vanilla card base. Then I took a piece of Mint Macaron measuring 4-1/8″ x 5-3/8″ and added a piece of the Petals & Paisleys Specialty Designer Series Paper (4″ x 4″) to the bottom portion. I love using my Designer Series Paper in sizes that are divisible by 12 so that I can use every inch of the 12″ x 12″ sheet with no leftovers. I stamped the greetings from the Paisleys & Posies Stamp Set onto a piece of Very Vanilla (5-1/4″ x 4″) in Cajun Craze Ink. I thought it needed a little bit more on the sides of the greeting so I took one of the leaves from the same set and stamped it in Mint Macaron Ink. I stamped once in full strength and then turned it a bit and stamped again for a lighter shade. I added this piece to the top of the Mint Macaron. You will have a little bit of overlap between the vanilla and the designer paper and that is where you will tie your ribbon. I used the Mint Macaron Ribbon from the coordinating Ribbon Trio Pack. Add this to the card base and then you are all done!!!

This is not a color combination I would normally think to use so I’m excited to stamp outside the box and try something new! I’m loving the Paisley Suite for the color combinations, the images, and the copper!!! 🙂 Stay tuned as I will be posting a lot more samples using these products!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Sep 5 2016

Looking Who’s Turning 3!!!

Posted on September 5, 2016 by Laura's Stamp Pad

I created this card for my niece who is turning 3 this month!!! It’s so bright and cheery!!! I love it!

I started with a Daffodil Delight card base. Then I took a piece of Flirty Flamingo (4-1/8″ x 5-3/8″) and layered on a piece of Affectionately Yours Designer Series Paper (4″ x 3″) on the bottom portion. I took a piece of Whisper White (4″ x 2-1/2″) and I stamped the “look who’s turning” from the Number of Years Stamp Set in Night of Navy. I added that piece to the top of the Flirty Flamingo and placed a strip of the Watermelon Wonder Mini Striped Ribbon across the card where the papers meet. Now you can adhere this to the card front with Stampin’ Dimensionals. I used dimensionals because well….why not? I love them…..but also because I wanted the card to look smooth and the ribbon would make it a little bumpy on the edges. I stamped the number 3 from the Number of Years Stamp Set onto scrap paper and used the coordinating Large Number Framelits to die cut it out. I stamped the Happy Birthday from the Number of Years Stamp Set in Night of Navy onto a scrap of white and added little banner tips to the end. Cut up in the middle and then cut diagonal from the corner to that center line for the perfect banner tips! I layered the greeting banner onto a Watermelon Wonder banner and added them to the bottom of the card! I love it! It is just precious and will be perfect for my niece…..let’s just hope I remember I already made this card for her and don’t give her a different one! 🙂

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Sep 2 2016

Birthday Cupcakes!!!

Posted on September 2, 2016 by Laura's Stamp Pad

My birthday month is over but there are still a few cupcakes left! 🙂 We should all celebrate our birthdays and every wonderful day that we have here!!! Celebrate, Smile, and Live Life to the Fullest!!!

This card starts with a Rich Razzleberry card base and I layered on a piece of the Pop of Pink Specialty Designer Series paper to it. I used the piece that has the gold flecks. I love the little bit of bling. Then I took a piece of Whisper White measuring 1-1/2″ x 5-1/4″ and I stamped the greeting from the Sweet Cupcakes Stamp Set in Rich Razzleberry on the right hand top side. I added this to the center of the card front. With some scrap white paper, I stamped the cupcake liner in Tip Top Taupe. First image was stamped off twice, second image was stamped off once, and the third image is full strength Tip Top Taupe. The icing was stamped in Rich Razzleberry the same way. Check out this video for more on how to stamp the cupcake! I die cut the cupcake liner and icing with the coordinating Cupcake Cutouts Framelits (Bundle & Save 10%). I added the cupcake to the card front with Stampin’ Dimensionals for a little texture on the card. The Cupcake Cutouts Framelits also has the greeting “sweet” and “wish” in it so I die cut the sweet in Gold Foil Paper. I added the greeting to the card with the Fine Tip Glue Pen! I love that glue for the intricate images. It is super easy to use and works so well. I add a very small amount to the larger areas/ends of the image (like a little snail trail amount) and then press it onto the card and hold for 10 seconds to allow the glue to hold tight. Then if there is a spot that is still popping up, just stick the tip of the glue pen under there and add a smidge more. I love this card!!!

If you would like to see more samples using the Sweet Cupcake Bundle, check them out here!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Aug 26 2016

Precious Ombre Pinks!!!

Posted on August 26, 2016 by Laura's Stamp Pad

I loving the Pink and Yellow combination of this card with that little pop of copper bling in the washi tape!!! I love it!!!

I started with a piece of the Irresistibly Yours Designer Series Paper measuring 5″ x 3-3/4″. I used 3 different colors for the background (although it is hard to tell). The colors are Flirty Flamingo, Calypso Coral, and Watermelon Wonder and I added them ot the designer paper with a Sponge Brayer. I went diagonal and just rolled over the paper until I got the shade I loved. Remember pressing hard into the ink or onto your paper won’t make the color become darker. Just lightly roll in the ink and then lightly over the paper. If you want darker, just repeat that same move. Be sure that when you are moving to the next color, you will want to overlap the colors so they blend and don’t look like stripes. After you are done adding your color, wipe off the excess ink with a paper towel to make the embossed image POP! I added some of the Affectionately Yours Designer Washi Tape along the bottom (copper dots). Then, I layered this onto Daffodil Delight (4″ x 5-1/4″) and then onto a Flirty Flamingo card base! I die cut the flower from the May Flowers Framelit Set in Watermelon Wonder and added it to the front of the card with the Fine Tip Glue Pen! For the greeting, I used the Greatest Greetings Stamp Set and punched it out with the Classic Label Punch. I added the greeting to the card with Stampin’ Dimensionals! I love it! This card would be perfect for any occasion – baby, birthday, wedding, just because!!!

What color combination would you use for this card? Pinks like mine? Blues? Greens? Purples? Multi-color? Let me know in the comments below!!!

Happy Stampin’

~Laura

Don’t forget about the Paper Pumpkin BOGO Sale for new subscribers!!! Click here to get started and be sure to enter the Promo Code: BOGO

Aug 24 2016

Copper Coils Make Flowers POP!!!

Posted on August 24, 2016 by Laura's Stamp Pad

Simple and fabulous! I really like making cards with this card style of designer paper or stamping along the left side and a greeting in the bottom right corner. It is a great way to use small pieces of designer paper because you can go as wide or slim as you need! You can leave the strip alone or add a little pop of a flower or image. You can add ribbon or rhinestones or enamel shapes. All up to you on how much you would like to dress it up!

I started with a Crumb Cake card base. I cut a 1-1/2″ x 5-1/2″ strip of Affectionately Yours Designer Series Paper and layered it onto a piece of Watermelon Wonder (2″ x 5-1/2″). I stamped the greeting from the Love & Affection Stamp Set in the lower right corner in Night of Navy. You want to make sure the greeting is far enough over that it won’t be covered by your strip. You can place it on the card for spacing. I usually don’t adhere it down till the stamping is complete and looks good…..just in case! 🙂 I had a little bit of extra space in the corner so I added a little flower from the same set in Watermelon Wonder. Now you can add your designer paper strip. For the flower, I stamped it in Mint Macaron onto Mint Macaron cardstock. The center of the flower was stamped in Night of Navy. There isn’t a punch so I fussy cut it out. I don’t do this often but sometimes it just needs to happen to make the perfect card! It is a fairly simple flower to cut out. Then I took some Copper Metallic Thread and wrapped it around 4 fingers about 5-10 times and slipped them off my fingers and twisted in the middle to make a figure 8. Set the loops onto the back of the flower and place some Stampin’ Dimensionals around the back to hold the ends and loops onto the flower. Now you add it to your card and you are all set!!!

If you would like to check out more samples using the Love & Affection Suite, check out these here, here, and here!

Happy Stampin’

~Laura

Aug 23 2016

Technique Tuesday – Embossing Foil Paper!!!

Posted on August 23, 2016 by Laura's Stamp Pad

Happy Tuesday!!! You all know what that means! I have a fabulous technique to share with you today and it is super simple but has a major WOW factor! Check out this beauty – pink perfection, yummy cupcake, silver bling, and silver texture foil!!!

I just love this card. It makes me so happy and I just want to frame it so I can smile every time I pass by it!!! There is so much pink and bling and texture!!!

SUPPLIES NEEDED: Embossing Folder of Choice, Big Shot, Foil Paper of Choice

I took a piece of Silver Foil Paper and placed it into the Elegant Dots Embossing Folder. Be sure that the foil is faced up correctly on how you want your image. If you want it embossed the raised side should be behind the foil, if you want it debossed the raised side should be on the foil side! Run it through the Big Shot and check out the beautiful paper you just created! It is that simple. Isn’t that fabulous???

This card starts with a Melon Mambo card base and I layered on a piece of Whisper White cardstock (4″ x 5-1/4″). Then I took a piece of the Pop of Pink Specialty Designer Series Paper (3-3/4″ x 5″) and adhered it to the card front. I just wanted to layer on all the pink I could! 🙂 I placed the embossed Silver Foil to the bottom 1/3 of the card. Taking a piece of Whisper White, I stamped the greeting from the Sweet Cupcakes Stamp Set in Melon Mambo and added the banner tips with the Triple Banner Punch! I added this to the right side of the card flush with the edge on top of the foil. I used Stampin’ Dimensionals to adhere the greeting because the foam goes into the bumps of the embossed image and holds very well. With some scrap white paper, I stamped the cupcake liner in Tip Top Taupe. First image was stamped off twice, second image was stamped off once, and the third image is full strength Tip Top Taupe. The icing was stamped in Melon Mambo the same way. Check out this video for more on how to stamp the cupcake! I die cut the cupcake liner and icing with the coordinating Cupcake Cutouts Framelits (Bundle & Save 10%). I added the cupcake to the card front with Stampin’ Dimensionals again to hold tight on the bumps of the embossed foil. I wanted a little more bling on this card so I added some Silver Sparkle Dazzling Details to the cupcake icing and little dots on the greeting banner!

Tuesday is also video day on my YouTube Channel – Laura’s Stamp Pad. Today I posted a sneak peak of one of the kits in the Holiday Mini Catalog that begins on September 1st! Click here to check that out!

To see more samples using the Sweet Cupcake Bundle, click here!

Happy Stampin’

~Laura

Laura's Stamp Pad

Laura Borchert ¤ Independent Stampin' Up!® Demonstrator ¤ Laura@LaurasStampPad.com

Tag Archives: Designer Series Paper

Halloween One Sheet Wonder!!!

Part 2: Double Z Fold Frenzy

Lovely Layers!!!

Petals & Paisleys!!!

Thankful~Grateful~Blessed

Looking Who’s Turning 3!!!

Birthday Cupcakes!!!

Precious Ombre Pinks!!!

Copper Coils Make Flowers POP!!!

Technique Tuesday – Embossing Foil Paper!!!