Birthday Present!!!

Posted on

Birthday Present, www.LaurasStampPad.com

This card is super adorable and can be changed up with any of your favorite Designer Series Paper. When you use Designer Paper in the same pack, then the colors always coordinate so that makes it super easy and fun to mix and match!!! I love it!!!

I started with a Whisper White card base and layered on a piece of Party Animal Designer Series Paper measuring 3-3/4″ x 5″! Then I took another piece of Party Animal Designer Paper (4″ x 3″) and added it to the card front with Stampin’ Dimensionals so that the present looks more 3D. I added a strip of Pacific Point (1/4″ x 4″) down the center of the card to look like ribbon. I used the Fine Tip Glue Pen since it is so little. I die cut the bow at the top from the Balloon Pop-Up Thinlit Dies in Pacific Point as well! I put a little piece of a Stampin’ Dimensional on the center of the bow and added it to the top of the present! I love it!! For the greeting, I stamped it from the Balloon Adventures Stamp Set in Tangerine Tango. The greeting was stamped onto Whisper White measuring 1″ x 3″. I punched the banner tips out with the Triple Banner Punch. I added the greeting to the present with Snail Adhesive but I lined up the edge of it with the edge of the background designer paper. Simple and fabulous!!!

You can Bundle & Save 10% when you order the Stamp Set and Thinlits together!!! You also get to pick out a Sale-A-Bration item for FREE when you order before March 31st! How amazing is that?!?!?! I love Sale-A-Bration because I love getting bonus freebies for every $50 I order! Click here to start shopping and earning your Sale-A-Bration items!

Happy Stampin’

~Laura


Technique Tuesday – Golden Letters!!!

Posted on

Happy Tuesday!!! I am super excited to share this amazing technique with you today! It is super fabulous and I’m in love! Check out this beauty!!!

Golden Congrats, www.LaurasStampPad.com

Isn’t this card stunning?? The beautiful navy and white with a splash of gold and those letters! LOVE!

SUPPLIES NEEDED: Greeting Stamp Set, VersaMark Ink, Gold Embossing Powder, Heat Tool, Sponge Dauber

I started with a piece of Whisper White (4-1/2″ x 1-1/2″) and stamped the fabulous large greeting from the Double Take Stamp Set that is in the Occasions Mini Catalog! I stamped the congrats in Night of Navy Ink and then cleaned off the stamp. Then you will want to dry the image by going over it a bit with the Heat Tool just to make sure it is completely dry. Then I pounced over the image with the Embossing Buddy to reduce static. I took a Sponge Dauber and pounced in the VersaMark Ink and then onto the lower half of the greeting stamp. Once I added VersaMark to the bottom half, I stamped it over the greeting! It is pretty easy to line up the greeting to stamp again since it is a Photopolymer Stamp Set but if you aren’t sure of yourself, you can always use the Stamp-A-Ma-Jig. Once I stamped the greeting, I poured some Gold Embossing Powder over the greeting. If there is some powder higher on the letters than you wish, you can always push some of the powder off with your finger. Next, I set the powder with the Heat Tool. If you would like a basic heat embossing video tutorial, check that out here! Then I layered the greeting onto a piece of Night of Navy cardstock (4-3/4″ x 1-3/4″). I used a Whisper White card base and added some Floral Boutique Designer Paper (4″ x 5-1/4″). I placed a Gold Metallic Foil Doily in the center and then added the greeting with Stampin’ Dimensionals. I love this card so much and then had fun making this one too!!

LOVE, www.LaurasStampPad.com

For this card, I used the love from the Double Take Stamp Set and the Sending Love Designer Series Paper! I rounded the corners to soften the look with the Corner Rounder Punch. I also added a little gold heart from the Metallic Enamel Shapes. I thought this would be perfect to give my husband for Valentine’s Day but it is a little more lovey dovey and I tend to make a more cutesy card! We shall see! Maybe I’ll make 2!

If you would like to see this all in action, check out the Video Tutorial below or click here! Don’t forget to give it a thumbs up if you liked it and be sure to subscribe if you are new! I post a video every Tuesday and Thursday!

Which do you prefer – the Congrats Card or the Love Card? Let me know in the comments below!

Happy Stampin’

~Laura


Valentine Treat Boxes!!!

Posted on

Clear Treat Box, www.LaurasStampPad.com

Valentine’s Day is a little over a week away so it is time to start getting those treat ready and cards created! You can see some samples of cards here and here! I did another Treat Package that is fabulous here! Today, we are creating these little treat boxes!!! Precious and super sweet….hehe get it…..chocolate is sweet! 🙂

The base for this box is Clear Tiny Treat Boxes which come with 16 in the pack! For the inside decoration, I used some of the Sending Love Designer Series Paper. I cut it into a 2″ x 6″ piece and scored it just a smidge over 2″ and then from that score line a smidge less than 2″. The reason for this is because the box is 2″ so when you score at exactly 2″ it is kind of tight in the box. I placed the paper into the box and added the chocolate treats. Yum!!!

Valentine's Day, www.LaurasStampPad.com

I added some ribbon around the box and tied it into a box using the Sending Love Designer Ribbon which comes with both white and red ribbon. This is perfect because then you can really mix and match with the different designer paper patterns! I left mine without a tag because I will be passing them out to various people – friends, family, and people I see all week this week at the grocery store, Post Office, etc. You could always add a tag using your favorite stamp set that has hearts or a To:/From: or you can use the fabulous Sealed with Love Stamp Set!

Do you make Valentine’s Treats for your kid’s classroom, friends, family, or strangers?? Let me know in the comments below!

Happy Stampin’

~Laura


Sending Love!!!

Posted on

Sending Love, www.LaurasStampPad.com

Valentine’s Day is around the corner and this card is perfect! It isn’t specific lovely Valentine’s Day but yet still a warm thought of sharing your love with someone!!! I love it!!!

I started with a Whisper White card base. I took the 4 heart image from the Sealed with Love Stamp Set from the Occasions Mini Catalog and stamped it in Night of Navy Ink along the top and bottom of the card front. It is really easy to line up the hearts because it is a photopolymer stamp set and you can see through the stamp. Then I added a piece of Sending Love Designer Series Paper to the middle of the card (2″ x 5-1/2″). You can get 3 of these cards from 1 sheet in the Designer Series Paper Stack. I have done lots of these cards but with different patterns and each one looks just as fabulous! For the greeting, I took a piece of Whisper White measuring 1″ x 5-1/2″ and punched the ends with the Banner Triple Punch! You want to punch before you stamp so that you aren’t punching off part of your stamped image. I stamped the hearts in Navy and the greeting in Real Red Ink. Some of the cards, I stamped one greeting and 2 hearts and some I did 2 greetings and 3 hearts. I added the greeting banner to the card front with Stampin’ Dimensionals for a little texture! I love it because it’s quick, simple, and yet created with so much love!

I did another Valentine’s Day card yesterday and did a Video Tutorial on both of these. You can check that out here! Do love Valentine’s Day as much as me? Do you send cards for the holiday? Let me know in the comments below!

Happy Stampin’

~Laura


Designer Paper Block Card!!!

Posted on

Sending Love Designer Paper, www.LaurasStampPad.com

I love Valentine’s Day because I love showing my love to those around me…including all of you! I hope that you know I truly care about all of you and I greatly appreciate you reading my blog, commenting, and sharing! Thank you all!!! I wish I could send you all a card but I would need all of your addresses! 🙂 So please know I love you all and wish you all the happiness!

For this card, I actually made it into a square but it still fits into a regular Whisper White Medium Envelope! For the card base, I cut a 4-1/4″ x 8-1/2″ which makes a 4-1/4″ square! Then I cut some pieces of the Sending Love Designer Series Paper into 2″ squares! The awesome thing about this is that it uses up every bit of the piece of paper because it is a 6″ Paper Stack! You can get 9 squares from each sheet! For the card above, I used the same sheet of paper front and back!

Happy Valentine's Day, www.LaurasStampPad.com

For this card, I used 2 different pieces of paper and used both front and back. I really struggled with how to do this one above because I didn’t know if it should be red and red and white and white or flip flopped. I think either way it would have turned out about the same but I sure struggled. 🙂 For the greeting, I stamped it in Real Red Ink from the Sealed with Love Stamp Set onto Whisper White. Then I die cut the circle and scallop circle out with the Layering Circle Framelits! I added the greeting to the card front with Stampin’ Dimensionals right in the middle. I love it!!!

If you would like to see this in action as well as another sample using the Sealed with Love Stamp Set and coordinating Sending Love Designer Paper, check out the Video Tutorial below or click here! Be sure to give it a thumbs up if you liked it and don’t forget to subscribe if you are new! I post every Tuesday and Thursday.

Happy Stampin’

~Laura


Valentine’s Day Triangle Treats!!

Posted on

Triangle Treat Pockets, www.LaurasStampPad.com

How cute are these little treat holders??? The don’t require any adhesive either which makes them super fabulous! All you need is a 6″ x 6″ piece of Designer Paper. For the one on the left, I used the Sending Love Designer Series Paper which is already in 6″ squares! For the one on the right, I used the Carried Away Designer Paper which is one of the Sale-A-Bration items you can get for Free with every $50.00 order! This paper is in 12″ square sheets so you will need to cut it down!!!

For these little treat pockets, you will fold your 6″ Square diagonal corner to corner to make a large triangle. With the point at the top and the other 2 points at either sides, fold the each of the side point across the front to the opposite side, straight across. Then fold the top little triangle down over your overlapped triangles. This final step is what holds everything in place!!

Triangle Treats Tutorial, www.LaurasStampPad.com

You can always squeeze the sides to pop it open and even press the bottom flat a little bit! Quick, simple and super cute! Now to fill it with some goodies! I used one of the 3″ x 6″ Gusseted Cellophane Bags to hold the chocolate treats! I tied some ribbon around the top into a bow using the Sending Love Ribbon Combo Pack which has red and white ribbon in it!

Treat Pocket, www.LaurasStampPad.com

These treat bags are perfect for classroom treats for Valentine’s or any other holiday. You could use these for a child’s birthday party or any type of party! I plan on using mine for my nieces and nephews Valentine’s Treats as well as a few to pass around randomly to share the love in February!!! 🙂

Balloon Treat Pocket, www.LaurasStampPad.com

Which one is your favorite? Let me know in the comments below – Valentine’s Day or Hot Air Balloons??

Happy Stampin’

~Laura


Hello Love!!!

Posted on

Hello Love, www.LaurasStampPad.com

When I attended Stampin’ Up! OnStage in November, we got to play with lots of new product and these 3 little Valentine’s cards were just a few of the projects we got to create!!! These are simple, adorable and just perfect for sharing a little love note!!! The base of each of the cards is a 3″ x 6″ piece of Sending Love Designer Series Paper! The card above has a little 2-3/4″ square of Whisper White with the stamped greeting from the Sealed with Love Stamp Set in Mint Macaron Ink. The adorable little arrow was die cut in Real Red cardstock using the coordinating Love Notes Framelits (Bundle & Save 10%)! Then with a little bit of Emerald Envy Baker’s Twine, I tied a bow and added it to the arrow with a Mini Glue Dot!

I love you, www.LaurasStampPad.com

This one is super fabulous especially with that extra little wooden heart from the Sending Love Embellishments! I stamped the little watercolor wash image from the Sealed with Love Stamp Set in Mint Macaron Ink. The greeting was stamped in Real Red Ink. The heart and arrow were die cut from the Love Notes Framelits. I used the Fine Tip Glue Pen to adhere them to the card. That glue is amazing for little things like this.

Teeny Tiny Note, www.LaurasStampPad.com

How adorable is that mini envelope??? That was created with the Love Notes Framelits and Sending Love Glassine Sheets! Just precious!!! The little note inside was created with the framelits and coordinating Sealed with Love Stamp Set to get those little hearts along the top! I added a little Emerald Envy Baker’s Twine around the envelope and tied it into a bow!

I hope these little love notes gave you inspiration for Valentine’s Day or just to have on hand to share with those you love all year long! Also, today I’m sharing with you my Unboxing and Reveal of my New Big Shot!!!! I am super excited to have a 2nd Big Shot to use for myself and at my events! This Big Shot also has the new Multi-Purpose Platform! Check out my excitement in the video below or click here! Be sure to give it a thumbs up if you liked it and don’t forget to subscribe if you are new!! I post videos every Tuesday and Thursday!!!

Happy Stampin’

~Laura


Confetti Celebration!!!

Posted on

Confetti Celebration, www.LaurasStampPad.com

This card is perfect to have on hand because it can be used for many different occasions!!! The other fabulous thing about this card is using the Pop Up Balloon Framelits in an out of the box way!!! Love it!!!

I started with a Whisper White card base and stamped the confetti image from the Balloon Adventures Stamp Set all over the background in Dapper Denim Ink. Then I took a piece of the Carried Away Designer Series Paper (3″ x 4-1/4″) which is one of the items you can get for FREE through Sale-A-Bration and added it to the card front. For the greeting, I stamped it from the Balloon Adventures Stamp Set onto a Whisper White piece measuring 1″ x 2-1/4″. I added the bow image to the top and bottom of the greeting piece. I die cut the bow from the coordinating Pop Up Balloon Thinlits (Bundle & Save 10%). Then I added all of this to a circle that I die cut with the Layering Circle Framelits. I added the circle to the card front with Stampin’ Dimensionals! Then I thought it needed just a little bit more so I added some Dapper Denim Enamel Shapes to the corners!!! I love how it turned out!!!

You can check out more samples using the Balloon Adventures Bundle here and here!

Happy Stampin’

~Laura


Birthday Balloons!!!

Posted on

Blue.Green Balloons, www.LaurasStampPad.com

A new year has begun and that means Birthdays will happen!!! I love sending Birthday Cards because it is the one event that we all partake in!!! I tend to struggle with man card since I love PINK and flowers and bling but this one is perfect!!!

I started with an Emerald Envy card base! Then I took a piece of Whisper White measuring 4″ x 3″ and punched the right side corners with the Corner Rounder Punch. I stamped the balloons from the Balloon Adventures Stamp Set in Pacific Point Ink and Emerald Envy Ink. I stamped the strings of the balloons in Basic Black Ink. I made this card first but since I have made a few more and I like the squiggle string better for this card. It makes the strings not look so straight and blah. I added this piece to a Emerald Envy card base in the middle of card. Then I added a piece of Party Animal Designer Series Paper measuring 1″ x 5-1/2″ along the left hand side of the card. This covers the gap between the edge of the card and the balloon piece! Then I added some Emerald Envy Taffeta Ribbon around the card and tied into a knot. The ribbon goes to the inside of the card! For the greeting, I stamped it in Pacific Point Ink onto Whisper White. I punched it out with the Decorative Label Punch. Then I punched out another one in Pacific Point and cut it in half. I put half behind the upper part of the greeting and the other hand on the lower portion of the greeting. Check out the video on how to do it here! I added the greeting to the card front with Stampin’ Dimensionals. Love it!!!

If you would like to get a Birthday Card this year, send me you name and address here! I would love to send out tons and tons of cards this year! #imbringingbirthdaysback

Happy Stampin’

~Laura


Love Hearts!!!

Posted on

Sending Love Hearts, www.LaurasStampPad.com

Quick and simple card ideas are always good to have in your back pocket. This design is not a new one! You might remember it from a few months ago when I created a holiday card! You can check it out here! I had some leftover pieces cut already so I thought I would make up the cards but updated to fit the upcoming holiday – Valentine’s Day! Some of the items used in this card are no longer available but you might still have them on hand from the Holiday Catalog or you can always change them up to fit what you have on hand!!!

I started with a Whisper White card base and stamped the greeting in the lower right corner in Real Red Ink. I used the Sealed with Love Stamp Set for this card! This stamp set is geared totally for Valentine’s Day but has great images and greetings for lots of occasions – anniversary, wedding, just because, and more! I took a small piece of the Candy Cane Lane Designer Washi Tape and placed it on the card front! Then I layered 3 squares – Candy Cane Lane Designer Series Paper (2-1/4″ Square), Real Red (2″ Square) and Whisper White (1-3/4″ Square). I stamped the heart from the same stamp set in Real Red! I layered the squares with Snail Adhesive but added it to the card with Stampin’ Dimensionals. Quick, simple and super adorable!!!

I just love this card and can’t wait to make tons of them to share my love with others on Valentine’s Day! I just love that holiday because I enjoy sharing my love and telling those that I love that I love them! I know many think that Valentine’s Day is all about teddy bears, chocolate, roses, and having a significant other but that’s not what it is to me. To me, it’s the perfect day to let others know they are loved! 🙂

Happy Stampin’

~Laura